Re: mls qos vlan based

You can apply a policy map to incoming traffic on a physical port or on an
SVI.
This example shows how to apply plcmap1 to an ingress SVI when VLAN-based
QoS is enabled:
Switch(config)# interface vlan 10
Switch(config-if)# service-policy input plcmap1

http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_58_se/command/reference/cli2.html#wp6193114

hth

On Sun, Sep 9, 2012 at 5:25 PM, Imran Ali <immrccie_at_gmail.com> wrote:

> in context of vlan based qos
>
> On Sun, Sep 9, 2012 at 6:24 PM, Imran Ali <immrccie_at_gmail.com> wrote:
>
> > Hi all,
> >
> > when i am policing traffic in 3560 for vlan 10 . does it mean "traffic
> > destined " to vlan 10 will be policed or traffic originated in vlan 10
> will
> > be policed .
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sun Sep 09 2012 - 21:22:20 ART