Re: EEM query

you mean if i say :

ROUTER(config)#event manager applet ABCD

ROUTER(config-applet)# event syslog pattern "Interface GigabitEthernet0/0,
changed state to down" " Interface GigabitEthernet0/1, changed state to
down"

it will look for both events ?

Gaurav Madan

On Fri, Aug 24, 2012 at 10:34 PM, Tony Singh <mothafungla_at_gmail.com> wrote:

>
> sorry shooting from the hip there, guess we would need to parenthesise
> event syslog pattern to include g0/1 before action 1.2 int rang g0/0-1
> --
> BR
>
> Sent from my iPhone on 3
>
> On 24 Aug 2012, at 17:43, GAURAV MADAN <gauravmadan1177_at_gmail.com> wrote:
>
> > Hi Friends
> >
> > I am not a great user of EEM .. just wanted a basic query to be answered
> >
> > My req says that if g0/0 and g0/1 is down .. then do something ( like
> > install a static route pointing to null 0)
> >
> > If I go in lines of :
> >
> > ROUTER(config)#event manager applet ABCD
> >
> > ROUTER(config-applet)# event syslog pattern "Interface
> GigabitEthernet0/0,
> > changed state to down"
> >
> > ROUTER(config-applet)# action 1.0 cli command "enable"
> >
> > ROUTER(config-applet)# action 1.1 cli command "configure term"
> >
> > ROUTER(config-applet)# action 1.2 cli command "interface g0/1"
> >
> > ROUTER(config-applet)# action 1.3 cli command "no shut"
> >
> >
> > My question is how will i do for both of g0/0 and g0/1 .. How do i make
> > sure that action is performed when both interfaces are down
> >
> > Any response is appreciated
> >
> > Thnx
> > Gaurav Madan
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Fri Aug 24 2012 - 22:56:24 ART