Re: EEM query

sorry shooting from the hip there, guess we would need to parenthesise event syslog pattern to include g0/1 before action 1.2 int rang g0/0-1

--
BR
Sent from my iPhone on 3
On 24 Aug 2012, at 17:43, GAURAV MADAN <gauravmadan1177_at_gmail.com> wrote:
> Hi Friends
> 
> I am not a great user of EEM .. just wanted a basic query to be answered
> 
> My req says that if g0/0 and g0/1 is down .. then do something ( like
> install a static route pointing to null 0)
> 
> If I go in lines of :
> 
> ROUTER(config)#event manager applet ABCD
> 
> ROUTER(config-applet)# event syslog pattern "Interface GigabitEthernet0/0,
> changed state to down"
> 
> ROUTER(config-applet)# action 1.0 cli command "enable"
> 
> ROUTER(config-applet)# action 1.1 cli command "configure term"
> 
> ROUTER(config-applet)# action 1.2 cli command "interface g0/1"
> 
> ROUTER(config-applet)# action 1.3 cli command "no shut"
> 
> 
> My question is how will i do for both of g0/0 and g0/1 .. How do i make
> sure that action is performed when both interfaces are down
> 
> Any response is appreciated
> 
> Thnx
> Gaurav Madan
> 
> 
> Blogs and organic groups at http://www.ccie.net
> 
> _______________________________________________________________________
> Subscription information may be found at: 
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net