Joe , plz ignore my ignorance (if any found).
what i got is cisco introduced first AutoQos-Voip in 12.2T . This does not
have "*any*" discovery phase and straight away deploys MQC class-maps and
policy maps for voice-related traffic.
Configuring the AutoQoS VoIP Feature on a High-Speed Serial Interface
Example
In this example, the AutoQoS VoIP feature is configured on the high-speed
serial interface s1/2.
Router> *enable*
Router# *configure terminal*
Router(config)# *interface s1/2 *
Router(config-if)# *bandwidth 1540 *
Router(config-if)# *auto qos voip *
Router(config-if)# *exit *
Configuring the AutoQoS VoIP Feature on a Low-Speed Serial Interface
Example
In this example, the AutoQoS VoIP feature is configured on the low-speed
serial interface s1/3.
Router# *configure terminal*
Router(config)# *interface s1/3 *
Router(config-if)# *bandwidth 512 *
Router(config-if)# *ip address 10.10.100.1 255.255.255.0 *
Router(config-if# *auto qos voip *
Router(config-if)# *exit *
**
*auto qos voip : Relies on NBAR *
*auto qos trust: Classifies based on dscp values .....*
*================================================================*
*where as AutoQos-Enterprise first discovers and then applies class-maps
and policy maps..based on discovered ..*
**
**
**
**
**
On Wed, Aug 15, 2012 at 2:38 AM, Joe Sanchez <marco207p_at_gmail.com> wrote:
> Imran,
>
> Learn these Auto QoS features at a minimum:
>
> auto discovery qos
> auto qos voip
> auto qos trust
>
> As the blue print indicates: All the below is FAIR GAME on the exam.
>
> 8.00 Implement Quality of Service (QoS)
> 8.10 Implement Modular QoS CLI (MQC)
> (a) Network-Based Application Recognition (NBAR)
> (b) Class-based weighted fair queuing (CBWFQ), modified deficit round
> robin (MDRR), and low latency queuing (LLQ)
> (c) Classification
> (d) Policing
> (e) Shaping
> (f) Marking
> (g) Weighted random early detection (WRED) and random early detection
> (RED)
> (h) Compression
> 8.20 Implement Layer 2 QoS: weighted round robin (WRR), shaped round
> robin (SRR), and policies
> 8.30 Implement link fragmentation and interleaving (LFI) for Frame
> Relay
> 8.40 Implement generic traffic shaping
> 8.50 Implement Resource Reservation Protocol (RSVP)
> 8.60 Implement Cisco AutoQoS
>
> Joe Sanchez
> Chicago, IL
>
> On Tue, Aug 14, 2012 at 4:42 PM, Imran Ali <immrccie_at_gmail.com> wrote:
>
>> hi experts....
>>
>> Auto QOS has basically two flavors on routers : AutoQos Voip and AutoQos
>> Enterprise.
>>
>> Which is most advantageios ....or should i say if asked in lab what
>> should
>> i implement ...
>>
>> Are their any specific caveats that point to specific feature ????
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
Received on Thu Aug 16 2012 - 21:27:57 ART
This archive was generated by hypermail 2.2.0 : Sat Sep 01 2012 - 08:41:18 ART