Re: Another error in QOS

Butcher,
do you have a name ? :)

The errors you are getting are telling you what the problem is: no
memory. I don't know in GNS, but in dynamips (which is the actual engine
doing the emulation) you can change the amount of (virtual) memory you
provision to a router, so I guess there should be a corresponding knob
in GNS. Try giving the router more memory.

As for testing QoS using dynamips, I would be very careful. The software
part works, the configuration is as it should be (after all you ARE
running IOS) but the interfaces are not real interfaces and the TXRING
might signal congested all the time, or never. So I would not do any
actual testing of QoS performance using it.

-Carlos

ccie.butcher @ 30/07/2012 07:59 -0300 dixit:
> R2(config-if)#service-policy input policymap1
> *Cannot create QoS MIB tree chunk //
> Another eror what does it mean
> *R2(config-if)#
> *Mar 1 00:22:30.559: %SYS-2-MALLOCFAIL: Memory allocation of 32768 bytes
> failed from 0x6003B890, alignment 0
> Pool: Processor Free: 18012 Cause: Not enough free memory
> Alternate Pool: None Free: 0 Cause: No Alternate pool
> -Process= "Exec", ipl= 0, pid= 90 -Traceback= 0x61491108 0x60015090
> 0x6001DE00 0x6003B898 0x6003A71C 0x611683F4 0x61168AE8 0x624FFD60
> 0x62466898 0x624FD940 0x624F0394 0x624F04D0 0x624B5EA4 0x6247595C
> 0x62A917D8 0x62A91948
>
> Does gns support QOS.
>

-- 
Carlos G Mendioroz  <tron_at_huapi.ba.ar>  LW7 EQI  Argentina
Blogs and organic groups at http://www.ccie.net