RE: ISRG2 HSRP decrement

From: Rich K <tkjokes_at_hotmail.com>
Date: Sat, 28 Jul 2012 10:05:20 +0000

This is already a live customer router now, cannot do any debugs, but the
cofig is as per below:

track 2 ip route x.x.x.0/24 reachability
track 3 ip route x.x.x.0/24 reachability
!
!
track 100 list boolean OR
object 2
object 3
!
interface FastEthernet0/1
description CUSTOMER LAN HSRP PRIMARY
ip address xx.xx.1.1 255.255.255.0
standby 1 ip xx.xx.1.3
standby 1 preempt delay minimum 30
standby 1 track GigabitEthernet0/0
standby 1 track 100
!
**CE-2 BACKUP**
interface FastEthernet0/1
description CUSTOMER LAN HSRP BACKUP
ip address xx.xx.1.2 255.255.255.0
standby 1 ip xx.xx.1.3
standby 1 priority 95
standby 1 preempt

Regards,

Rich

> CC: ccielab_at_groupstudy.com
> From: jay.mcmickle_at_yahoo.com
> Subject: Re: ISRG2 HSRP decrement
> Date: Fri, 27 Jul 2012 20:36:39 -0500
> To: tkjokes_at_hotmail.com
>
> Okay. Can you show us the config and your debugs that shows us the error?
HSRP is pretty straight forward, IMO.
>
> Regards,
> Jay McMickle- CCIE #35355 (RS), 3x CCNP (RS,Security,Design)
> Sent from my iPhone
>
> On Jul 27, 2012, at 8:17 PM, Rich K <tkjokes_at_hotmail.com> wrote:
>
> > Hi jay,
> > Yes, I'm using preempt and object tracking (Boolean OR)
> > Rich
> >
> > Date: Fri, 27 Jul 2012 13:43:16 -0700
> > From: jay.mcmickle_at_yahoo.com
> > Subject: Re: ISRG2 HSRP decrement
> > To: tkjokes_at_hotmail.com; ccielab_at_groupstudy.com
> >
> > Rich,The decrement value is still 10 by default in IOS 15. Are you using
> > tracking statements and preempt statements?
> > Regards,
> > Jay McMickle- CCIE
> > #35355 (R&S)
> >
> > From: Rich K <tkjokes_at_hotmail.com>
> > To: ccielab_at_groupstudy.com
> > Sent: Friday, July 27, 2012 11:20 AM
> > Subject: ISRG2 HSRP decrement
> >
> >
> > Hi Experts, after some help...
> > My understading for HSRP decrement is that, if you do not set an explicit
> > decrement value, then the default is "decrement 10", but recently I
> > configured
> > Cisco 1900 series router, and I only got the HSRP to work when I
explicitly
> > added a decrement statement, so not sure why?
> > Thanks
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sat Jul 28 2012 - 10:05:20 ART

This archive was generated by hypermail 2.2.0 : Wed Aug 01 2012 - 15:55:23 ART