re: ospf distance

For OSPF, you should refer not to neighbor adress but router-id

please try instead :

distance 109 150.1.4.4 0.0.0.0

Best regards.

> Message du 25/07/12 C 12h02
> De : "shekhar sharma"
> A : "Cisco certification"
> Copie C :
> Objet : ospf distance
>
> Hi All,
>
>
> I was working with manipulating OSPF distance.
>
> Not able to change ospf distance per neigbour...Not sure if this is config
> issue or OSPF doesn't support it like EIGRP
>
> R5(config-router)#router ospf 1
> R5(config-router)#distance 109 142.1.0.4 0.0.0.0
>
> R5#sh ip route 142.1.34.4
> Routing entry for 142.1.34.0/24
> Known via "ospf 1", distance 110, metric 65, type intra area
> Last update from 142.1.0.4 on Serial0/0, 00:00:36 ago
> Routing Descriptor Blocks:
> 142.1.0.4, from 150.1.4.4, 00:00:36 ago, via Serial0/0
> Route metric is 65, traffic share count is 1
> * 142.1.0.3, from 150.1.4.4, 00:00:36 ago, via Serial0/0
> Route metric is 65, traffic share count is 1
> Regards,
> Shekhar
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>
Received on Wed Jul 25 2012 - 14:12:39 ART