Interesting
-- BR Sent from my iPhone on 3 On 11 Jul 2012, at 07:38, Sarad <tosara_at_gmail.com> wrote: > Hi Guys, > > Lolzzzzzz it is not what I thought... > > Check out following doc on cisco web site > > http://www.cisco.com/en/US/docs/ios/iproute_eigrp/configuration/guide/ire_cfg _eigrp.html#wp1060330 > > check under "EIGRP Stub Routing Leak Map Support" it says > > The stub router cannot readvertise routes it has learned from any neighboring EIGRP router. To resolve this issue, a leak map configuration can be added to the EIGRP stub routing feature that allows a selected set of learned routes to be readvertised to other peers. > > It seems to be leak map can be used to filter only learn routes not connected. Interesting. > > Cheers > Sara > > > > > > > > On Wed, Jul 11, 2012 at 3:24 PM, Tony Singh <mothafungla_at_gmail.com> wrote: > Thanks Leigh, could not find a config guide under 12.4 mainline will check it out, prior under a non stub router got it working perfect after interface summary. > > -- > BR > > Sent from my iPhone on 3 > > On 11 Jul 2012, at 02:05, "Leigh Finch" <leigh_at_leighfinch.net> wrote: > > > Hi Tony, > > As far as I can tell from the DOC-CD and my own testing, the leak-map only > > applies to routes learned via EIGRP. As soon as you apply a leak-map to an > > EIGRP stub you need to explicitly allow connected, static, redistributed > > routes if you want those. > > > > I think you are looking for something more like. > > > > eigrp 500 > > redistribute connected route-map LEAK metric 1 1 1 1 1 > > network 70.1.1.0 0.0.0.3 > > no auto-summary > > eigrp stub redistributed > > > > leigh > > > >> Any secret to using these maps on a stub area to leak two routes out? > >> > >> Here's my config.. > >> > >> R1>R2 10mbps fe 70.1.1.0/30 > >> > >> > >> R2 > >> > >> Loopbacks > >> 80.1.2.1 > >> 80.1.3.1 > >> > >> access-list 7 permit 80.1.0.0 0.0.3.255 > >> route-map LEAK > >> match ip address 7 > >> > >> eigrp 500 > >> network 70.1.1.0 0.0.0.3 > >> no auto-summary > >> eigrp stub leak-map LEAK > >> > >> I'm not seeing the routes on R1- go on point it out.. > >> > >> -- > >> BR > >> > >> Tony > >> > >> Sent from my iPad > >> > >> > >> Blogs and organic groups at http://www.ccie.net > >> > >> _______________________________________________________________________ > >> Subscription information may be found at: > >> http://www.groupstudy.com/list/CCIELab.html > > > Blogs and organic groups at http://www.ccie.net > > _______________________________________________________________________ > Subscription information may be found at: > http://www.groupstudy.com/list/CCIELab.html Blogs and organic groups at http://www.ccie.netReceived on Wed Jul 11 2012 - 09:45:17 ART
This archive was generated by hypermail 2.2.0 : Wed Aug 01 2012 - 15:55:23 ART