RE: Passive inteface on RIP

Salam,

I want advertising networks with specific mask or interface participation.

Thanks & Best regards

Ahmed Wael

-----Original Message-----
From: nvnish_at_gmail.com [mailto:nvnish_at_gmail.com]
Sent: Thursday, June 21, 2012 1:01 PM
To: Ahmed Wael; ccielab_at_groupstudy.com
Subject: Re: Passive inteface on RIP

Ahmed,

Did you try a distrIbute-list to filter it out?

Sent from my BlackBerry(r) wireless device

-----Original Message-----
From: Ahmed Wael <ahmed_wael_at_efinance.com.eg>
Sender: nobody_at_groupstudy.com
Date: Thu, 21 Jun 2012 10:49:26
To: ccielab_at_groupstudy.com<ccielab_at_groupstudy.com>
Reply-To: Ahmed Wael <ahmed_wael_at_efinance.com.eg>
Subject: Passive inteface on RIP

Dears,

I configured the following on R1:

Int lo0
Ip add 1.1.2.1 255.255.255.0
!
Int f 0/0
Ip add 1.1.1.1 255.255.255.0
!
Int f 0/1
Ip add 1.1.3.1 255.255.255.0
!
Router rip
ver 2
no auto
network 1.0.0.0
passive-interface default
neighbor 1.1.1.2
!

This neighbor is with R2. I found that lo0 and fast 0/1 interfaces in the routing table of R2.

How can I prevent R1 from sending lo0 and fast 0/1 to R2?

Thanks & Best regards

Ahmed Wael
IT Communications Engineer

Blogs and organic groups at http://www.ccie.net
Received on Thu Jun 21 2012 - 11:04:17 ART