Re: udp traceroute ports

it is actually easy to calculate if you know how to look up that 33434
start (low) port.
traceroute is by default across 30 hops, each hop is probbed 3 times,
each next probbing is prev port + 1, so 33434 +3*30 = 33524 would be a
good candidate for the end of the range.

HTH
A.

On 6/6/2012 8:18 PM, ccie99999 wrote:
> Joe.. thanks a lot for the link.
> I didn't know Master index is available during the lab.
>
> Tom.. yeah..great tip for remember the ports.. but still have to remeber
> the range.. that as far as I know is 33400-34400.
>
> thanks
>
>
> On Tue, Jun 5, 2012 at 2:31 PM, Joe Sanchez<marco207p_at_gmail.com> wrote:
>
>> If you cannot find the information you are looking for in the
>> configurations guides section, always try to use the Master Index to find
>> the most logical command that might fit what you are looking for. Take a
>> look at this link and see if this helps.
>>
>> http://www.cisco.com/en/US/docs/ios/mcl/124tmcl/124t_10.html#LTR_T
>>
>> Joe Sanchez
>>
>> On Tue, Jun 5, 2012 at 6:06 AM, ccie99999<ccie99999_at_googlemail.com>wrote:
>>
>>> hey guys..
>>>
>>> I need your help for this.. I'm not able to find in the doccd where
>>> they've
>>> specified which are the ports used by the udp traceroute..
>>>
>>> I know that's a range from 33400 to 34400 but I don't see this in the conf
>>> guides..
>>>
>>> searching in cisco.com I find something here:
>>>
>>> http://www.cisco.com/en/US/docs/security/security_management/security_auditor/1.0/policy/reference/sapolref.html#wpmkr730777
>>>
>>> but I don't think this is available during the lab.
>>>
>>> thank for your help.
>>>
>>> --
>>> ccie99999
>>>
>>>
>>> Blogs and organic groups at http://www.ccie.net
>>>
>>> _______________________________________________________________________
>>> Subscription information may be found at:
>>> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Wed Jun 06 2012 - 21:17:34 ART