Re: Study material for CCIE R&S troubleshooting

It depends on where you are at within your training. They are all great as I
contribute them to my success.
 
IPX VOL 3
If you feel you are an expert
If
you have the large number of routers needed
You don't need to know why a
solution was chosen
If you have their videos that accompany them, they
somewhat help you
These are for the Advanced, "I've got this" Engineer (and
trust me, you won't think that after you see them)
 
Narbik Troubleshooting
If
you like a good explaination for the "why", and where to look for the traps
Have racks similiar to the Cisco 360 layout
I advise most to start here as
they are for the beginner to experienced Engineer, as they aren't as hard or
kill your spirit as IPX does
 
INE VOL 4
If you have older hardware and don't
need that much detail on the why
If you have the videos to accompany them-
that helps
 
I appreciate all three of them. If I had to choose one or two, I
would choose (in this order), Narbik and INE. IPX is over-the-top difficult,
and made me want to give up at some points during my training.
 
Good luck!
Regards,
Jay McMickle- CCIE #35355 (R&S)
 

From: Sidney D'Souza
<mail.sidney_at_gmail.com>
To: ccielab_at_groupstudy.com
Sent: Saturday, May 19,
2012 11:43 AM
Subject: Study material for CCIE R&S troubleshooting

Hello
Experts,

Can anyone advise on some good practice material for the CCIE R &
S
troubleshooting section. Thanks.

Regards,

Sid

Nobody's really
listening, until you make a mistake...

Blogs and organic groups at
http://www.ccie.net
Received on Sat May 19 2012 - 10:25:38 ART