Re: trying to filter default 0.0.0.0/0

Hello,

Can you please do a show ip route ospf where you are doing the
redistribution on R2.

Regards,
Johhn

http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a008047915d.shtml#basics

On 5/14/12, dls152_at_cox.net <dls152_at_cox.net> wrote:
> Can someone please help me figure this one out. I am redistributing ospf
> into rip and trying to filter out 0.0.0.0/0 from entering into rip but i
> cant. Please review my commands an let me know if you see something wrong?
> I am showing hits on my prefix-list so I believe it should be working?
>
> router rip
> redistribute ospf 1 metric 1 route-map default
>
> route-map default deny 10
> match ip address prefix-list default
> route-map default permit 20
>
> ip prefix-list default seq 5 permit 0.0.0.0/0
>
> R2#sh ip pref det
> Prefix-list with the last deletion/insertion: default
> ip prefix-list default:
> count: 1, range entries: 0, sequences: 5 - 5, refcount: 3
> seq 5 permit 0.0.0.0/0 (hit count: 8, refcount: 1)

Blogs and organic groups at http://www.ccie.net
Received on Mon May 14 2012 - 18:39:53 ART