Re: 6500 - Power Problem

Try to plug both power supplies to single power source.

HTH

On Wed, Apr 18, 2012 at 6:20 PM, <khan.sirhan_at_gmail.com> wrote:

> I tried power enable in global config and it does not work. It says that
> the sup does not support power down or up.
>
> That's the confusing part, show power shows a different module down as
> opposed to the logs.
> Sent via my BlackBerry from Vodacom - let your email find you!
>
> -----Original Message-----
> From: ron wilkerson <ron.wilkerson_at_gmail.com>
> Date: Wed, 18 Apr 2012 10:15:30
> To: Sirhan Khan<khan.sirhan_at_gmail.com>
> Cc: group-study<ccielab_at_groupstudy.com>
> Subject: Re: 6500 - Power Problem
>
> Your syslog references module 1 but your "sh power" cmd shows module 2 is
> powered down. Which is it?
> Either way, try the command "power enable module x" from global config.
>
>
> On Wed, Apr 18, 2012 at 9:29 AM, Sirhan Khan <khan.sirhan_at_gmail.com>
> wrote:
>
> > Guys
> >
> > I need some advice on this, how to I solve?
> >
> > R-SP-4-DISABLED: power to module in slot 1 set off (admin request)
> > *Apr 17 04:41:03 UTC: %C6KPWR-SP-4-DISABLED: power to module in slot 1
> set
> > off (admin request)
> > *Apr 17 04:46:04 UTC: %C6KPWR-SP-4-DISABLED: power to module in slot 1
> set
> > off (admin request)
> > *Apr 17 04:51:05 UTC: %C6KPWR-SP-4-DISABLED: power to module in slot 1
> set
> > off (admin request)
> > *Apr 17 04:56:07 UTC: %C6KPWR-SP-4-DISABLED: power to module in slot 1
> set
> > off (admin request)
> > *Apr 17 05:01:08 UTC: %C6KPWR-SP-4-DISABLED: power to module in slot 1
> set
> > off (admin request)
> > *Apr 17 05:06:09 UTC: %C6KPWR-SP-4-DISABLED: power to module in slot 1
> set
> > off (admin request)
> > *Apr 17 05:11:10 UTC: %C6KPWR-SP-4-DISABLED: power to module in slot 1
> set
> > off (admin request)
> >
> >
> > ddc-csw-6505#show module 1
> > Slot Ports Card Type Model
> > Serial Number
> > ---- ----- -----------------------------------------
> ---------------------
> > -------------
> > 1 2 Cat 6000 sup 1 Enhanced QoS (other) WSSUP1A-2GE
> > SAD03344244
> >
> > Slot MAC addresses Hw Fw Sw
> > ---- ---------------------------------- ----- ------------ ----------
> > 1 00d0.bceb.8bb4 to 00d0.bceb.8bb6 5.0 unknown unknown
> > ddc-csw-6505#show powe
> > ddc-csw-6505#show power
> > system power redundancy mode = redundant
> > system power total = 27.460A
> > system power used = -7.110A
> > system power available = 20.350A
> > FRU-type # current admin state oper
> > power-supply 1 27.460A on on
> > power-supply 2 27.460A on on
> > module 1 -4.300A on on
> > module 2 -4.300A off off (admin request)
> > module 3 -2.810A on on
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
*Nadeem Rafi*
*Senior Network Consultant*
*CCIE # 28781 RS*
*
*
*00971-588199411*
*
*
Blogs and organic groups at http://www.ccie.net