Re: 6500 - Power Problem

I tried power enable in global config and it does not work. It says that the sup does not support power down or up.

That's the confusing part, show power shows a different module down as opposed to the logs.
Sent via my BlackBerry from Vodacom - let your email find you!

-----Original Message-----
From: ron wilkerson <ron.wilkerson_at_gmail.com>
Date: Wed, 18 Apr 2012 10:15:30
To: Sirhan Khan<khan.sirhan_at_gmail.com>
Cc: group-study<ccielab_at_groupstudy.com>
Subject: Re: 6500 - Power Problem

Your syslog references module 1 but your "sh power" cmd shows module 2 is
powered down. Which is it?
Either way, try the command "power enable module x" from global config.

On Wed, Apr 18, 2012 at 9:29 AM, Sirhan Khan <khan.sirhan_at_gmail.com> wrote:

> Guys
>
> I need some advice on this, how to I solve?
>
> R-SP-4-DISABLED: power to module in slot 1 set off (admin request)
> *Apr 17 04:41:03 UTC: %C6KPWR-SP-4-DISABLED: power to module in slot 1 set
> off (admin request)
> *Apr 17 04:46:04 UTC: %C6KPWR-SP-4-DISABLED: power to module in slot 1 set
> off (admin request)
> *Apr 17 04:51:05 UTC: %C6KPWR-SP-4-DISABLED: power to module in slot 1 set
> off (admin request)
> *Apr 17 04:56:07 UTC: %C6KPWR-SP-4-DISABLED: power to module in slot 1 set
> off (admin request)
> *Apr 17 05:01:08 UTC: %C6KPWR-SP-4-DISABLED: power to module in slot 1 set
> off (admin request)
> *Apr 17 05:06:09 UTC: %C6KPWR-SP-4-DISABLED: power to module in slot 1 set
> off (admin request)
> *Apr 17 05:11:10 UTC: %C6KPWR-SP-4-DISABLED: power to module in slot 1 set
> off (admin request)
>
>
> ddc-csw-6505#show module 1
> Slot Ports Card Type Model
> Serial Number
> ---- ----- ----------------------------------------- ---------------------
> -------------
> 1 2 Cat 6000 sup 1 Enhanced QoS (other) WSSUP1A-2GE
> SAD03344244
>
> Slot MAC addresses Hw Fw Sw
> ---- ---------------------------------- ----- ------------ ----------
> 1 00d0.bceb.8bb4 to 00d0.bceb.8bb6 5.0 unknown unknown
> ddc-csw-6505#show powe
> ddc-csw-6505#show power
> system power redundancy mode = redundant
> system power total = 27.460A
> system power used = -7.110A
> system power available = 20.350A
> FRU-type # current admin state oper
> power-supply 1 27.460A on on
> power-supply 2 27.460A on on
> module 1 -4.300A on on
> module 2 -4.300A off off (admin request)
> module 3 -2.810A on on
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Wed Apr 18 2012 - 14:20:34 ART