Re: Datacenter/ DR Nat Issue

not entirely related to your question but you might checked the following
possible option for your DR/Vmotion scenario:

1. QinQ (with BGP)
2. VPLS (with BGP)
3. LISP
4. DNS
5. OTV (with above mix, only N7k support this)

HTH

On Mon, Apr 16, 2012 at 9:17 PM, masroor ali <masror.ali_at_gmail.com> wrote:

> Hi everyone,
>
> I have a setup in which I have Datacenter and DR, incase of Datacenter
> unreachibility from Branch site, Branch should reach DR Servers with the
> same IP address of Datacenters.
>
> now I made a translation on DR router such that all requests that are
> comming for Datacenter server address should be translated to DR Servers,
> but nat is not translating address.
>
> what I feel the reason is the outside interface of DR router does not
> contain outside global address, but in nat command I am using IP as a
> outside global address.
>
>
> Data center server ip = 80.101.85.1
> DR server ip = 128.1.150.1
>
> DR Router configuration
> ===================
> ip nat outside source static *80.101.85.1* 128.1.150.1
> ip route 80.101.85.1 255.255.255.255 192.168.8.62
>
> int gig 0/1
> *ip add 192.168.8.1 255.255.255.0*
> ip nat ouside
>
> int gig 0/0
> ip add 192.168.18.1 255.255.255.0
> ip nat inside
>
>
>
>
> Thanks & Regards,
> Masroor Ali
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Tue Apr 17 2012 - 09:10:23 ART