Cisco WAAS Deployment Issue

Hi expert,

Im having diffulty deploying Cisco WAAS in Inline Mode.

my design setup with WAAS inline mode both in the Datacenter and branch
offices.

See Below my config template :

Branch-WAAS#sh run
! waas-universal-k9 version 4.3.1 (build b6 Nov 13 2010)
!
device mode application-accelerator
!

!
hostname Branch-WAAS
!
!
!
ip domain-name daieia.ng.org
!
!
!
primary-interface InlineGroup 1/0
!
!
!
interface GigabitEthernet 1/0
 exit
interface GigabitEthernet 2/0
 shutdown
 exit
interface InlineGroup 1/0
 ip address 172.16.120.2 255.255.255.0
 inline vlan all
 exit
interface InlineGroup 1/1
 inline vlan all
 shutdown
 exit
!
!
ip default-gateway 172.16.120.1
!
no auto-register enable
!
! ip path-mtu-discovery is disabled in WAAS by default
!
ip name-server 10.10.1.10
!
!
!
ntp server 172.16.120.254
!
!
!
!
ip icmp rate-limit unreachable df 0
!
!
!
username admin password 1 daieia
username admin privilege 15
!
!
!
!
authentication login local enable primary
authentication configuration local enable primary
!
!
!
!
!
!
tfo tcp optimized-send-buffer 2048
tfo tcp optimized-receive-buffer 2048
!
!
!

*** A demo test was performed by the application team but the complain was
the connection to datacenter server hosting the application is very slow.

ANY INPUT AND ADVICE WILL BE HIGHLY APPRECIATED PLEASE

Best Regards

Da-IE-IA

Network Engineer

Blogs and organic groups at http://www.ccie.net
Received on Mon Mar 12 2012 - 21:47:26 ART