Gaurav,
Looks like CME8.0 is only available on 15.0(1)XA and up, according to the
matrix.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/33matrix.htm
With your IOS image, it looks like you can only go to 7.1. You'll probably
need to beef up DRAM and Flash to get 15.X code on there.
To login to CME GUI you need to use http://yourrouterip/ccme.html
Username and Password should be variphy and cisco according to your pasted
conf.
The URL Auth command is only used for application authentication for the
phones to the router. Not to login to the router and administer it. Hope
that makes sense.
Some of the questions you have asked concern me that you're new to CME.
Please use caution with your CME box and consult an IPTX expert or TAC if
you need further assistance.
HTH,
JB
On Wed, Mar 7, 2012 at 11:17 PM, Gaurav Thukral <pearlgaurav_at_gmail.com>wrote:
> Hi All
>
> I am using cisco 2811 router for CME. I am using the below mentioned IOS.
>
> c2800nm-adventerprisek9_ivs-mz.124-22.T5.bin
>
> Kindly help me to find out CME 8.0 download link from cisco.com. I am
> only able to find it for IOS 15.0.
>
> I am using the below mentioned config to Remote Control the IP Phones.
>
> voice register global
> url authentication http://177.1.254.3/CCMCIP/authenticate.asp
>
> username variphy privilege 15 password cisco
>
> ip http server
> ip http authentication local
> ip http path flash:gui
>
> ixi transport http
> shutdown
> ixi application cme
> shutdown
> telephony-service
> url authentication http://177.1.254.3/CCMCIP/authenticate.asp variphy
> cisco
>
> What URL and username/password i have to use to login on web interface
> of variphy.
>
>
>
> --
> Thanks & Regards,
> Gaurav Thukral
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
Received on Thu Mar 08 2012 - 09:33:53 ART
This archive was generated by hypermail 2.2.0 : Sun Apr 01 2012 - 07:56:52 ART