Re: Kron command for scheduling IP SLA udp voip jitter probes

I suppose the question would be what is the goal here. This sounds like an Off Topic item. But, what the heck sounds cool anyways. For the IP-SLA jitter probe, being an automate function would defeat the purpose of the IP-SLA as this type of probe would be an active configuration with a sender and receiving configured between the two end points. However, if you really needed to get this done all you need is a trigger to launch eem to configure the IP-SLA on the fly, then a trigger to remove the Ip-SLA. You might be able to trigger this with a Kron configuration parameter by having the Kron generate a syslog entry or another feature that the eem can trigger on?

If I get sometime maybe I'll try this, sounds interesting.

Regards,
 Joe Sanchez

On Feb 27, 2012, at 10:02 AM, Marko Milivojevic <markom_at_ipexpert.com> wrote:

> Could be a little bit more elaborate on what you are trying to achieve?
>
> --
> Marko Milivojevic - CCIE #18427
>
> :: This message was sent from a mobile device. I apologize for errors and brevity. ::
>
> On Feb 26, 2012, at 6:49, Amit Kumar Lohumi <getakl_at_gmail.com> wrote:
>
>> Hi All,
>>
>> Could anyone please confirm if it is possible to automate and schedule IP
>> SLA voip udp jitter probes using the Cisco IOS kron utility ?
>>
>> If anyone has tried it .... kindly share an example config.
>>
>> Regards,
>> Amit Kumar Lohumi
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Tue Feb 28 2012 - 06:39:10 ART