Re: Cisco ISR Router - LoadBalancing Link

Should work without issues. use PBR . Match acl in pbr which matches link1
specific traffic and set interface dialer. next pbr match other acl which
matches the other interesting traffic and set next hop static IP.

For failovers, you can do ip sla and have it change pbr accordingly.

VPN of course will not work when ur statics IPs are down.
But there is no point of failover, since you email and vpn and other hosted
services will be natted to those static public ips which you've got from
the ISP. so routing them through the dynamic dialer wouldn't help it route
traffic back form the internet.

On Sun, Feb 12, 2012 at 10:55 PM, Vishal Rane <vishal.rane_at_hotmail.co.in>wrote:

> Hello Experts
>
> I am trying to understand if the following is doable with a CISCO ISR
> Router
> 2900 series
>
>
> Terminate Two Internet Links ( 1 - DSL with Dynamic IP ) ( 2 - Static IP,
> Interface Type - Ethernet ) on One ISR Router and LoadBalance both links
> Pass HTTPS, Email, IPSEC traffic on Internet Link -2 ; Pass HTTP traffic
> on
> Internet Link - 1
> If Internet link 1 fails all traffic is routed to Link 2 and if Internet
> Link
> 2 fails all traffic is routed to Link2
>
> thanks
> Vishal Rane
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sun Feb 19 2012 - 13:07:24 ART