Re: Router macros in the lab?

Fantastic, thank you! Knew there had to be a way. Never would have
guessed THAT command though.

Keller Giacomarro
keller.g_at_gmail.com

On Sun, Jan 29, 2012 at 7:33 AM, N. Max Pierson <nmaxpierson_at_gmail.com>wrote:

> show c2600 | i DIMM
>
> That should get you what you need.
>
> --
> max
>
>
> On Sun, Jan 29, 2012 at 7:27 AM, Keller Giacomarro <keller.g_at_gmail.com>wrote:
>
>> Yep, got em! Now I just have to go freeze outside to go see if I have 1
>> or 2 RAM modules in it already. Brr!
>>
>> No one knows a command to see how many physical RAM modules are installed
>> in a 2600, do they? =P
>>
>> Keller Giacomarro
>> keller.g_at_gmail.com
>>
>>
>>
>> On Sun, Jan 29, 2012 at 7:25 AM, N. Max Pierson <nmaxpierson_at_gmail.com>wrote:
>>
>>> Yes, that's probably the issue. I am running 12.4.15T14 on my 2600's.
>>> Make sure you have the XM based 2600's, or you can't fit the 256mb of DRAM
>>> to run the latest 12.4T.
>>>
>>> regards,
>>> max
>>>
>>>
>>> On Sun, Jan 29, 2012 at 7:17 AM, Keller Giacomarro <keller.g_at_gmail.com>wrote:
>>>
>>>> I am running c2600-adventerprisek9-mz.124-19.bin on my 2611s. Based on
>>>> you having the command available, I'm starting to suspect that it is only
>>>> available in the 12.4T train and not mainline. Oh well, I needed an excuse
>>>> to buy the extra memory and get all my routers on 12.4(T)!
>>>>
>>>> Keller Giacomarro
>>>> keller.g_at_gmail.com
>>>>
>>>>
>>>>
>>>> On Sun, Jan 29, 2012 at 7:14 AM, N. Max Pierson <nmaxpierson_at_gmail.com>wrote:
>>>>
>>>>> I have some 2600's in my lab as well (well 2600XM's) and they have the
>>>>> macro functionality. What version of IOS are you running??
>>>>>
>>>>> The real lab will have macro's enabled on all switches and routers as
>>>>> they run 12.4.(XX)T on the routers and 12.2.(XX) on the switches.
>>>>>
>>>>> -
>>>>> max
>>>>>
>>>>> On Sun, Jan 29, 2012 at 6:57 AM, Keller Giacomarro <keller.g_at_gmail.com
>>>>> > wrote:
>>>>>
>>>>>> While using GNS3, I got used to using macros for both my routers any
>>>>>> my
>>>>>> switches. Now that I've bought real routers, I discovered that the
>>>>>> 2600s
>>>>>> do not support macros! Does anyone know the hardware for the routers
>>>>>> in
>>>>>> the lab? Are macros available on all devices, or do I need to learn
>>>>>> enough
>>>>>> TCL for ping macros?
>>>>>>
>>>>>> Thanks!
>>>>>>
>>>>>> Keller Giacomarro
>>>>>> keller.g_at_gmail.com
>>>>>>
>>>>>>
>>>>>> Blogs and organic groups at http://www.ccie.net
>>>>>>
>>>>>>
>>>>>> _______________________________________________________________________
>>>>>> Subscription information may be found at:
>>>>>> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sun Jan 29 2012 - 07:39:45 ART