RE: IOS output display for displaying routes learned from

Thanks Tom!

> Date: Fri, 20 Jan 2012 11:10:04 -0600
> Subject: Re: IOS output display for displaying routes learned from specific
interface
> From: tom.kac_at_gmail.com
> To: roccor21_at_hotmail.com
> CC: ccielab_at_groupstudy.com
>
> Try this command:
>
> show ip cef TenGigabitEthernet2/1
>
>
> that should show you only the routes for that interface.
>
> Hope that helps.
>
> Tom Kacprzynski
>
>
> On Fri, Jan 20, 2012 at 10:16 AM, Rocco Romeo <roccor21_at_hotmail.com> wrote:
>
> > Hi guys, I'm trying to remember if there's a way in IOS to only show OSPF
> > routes learned from a specific interface. When I | (pipe) include it will
> > only
> > show the interface and next hop learned from but will not include the
> > actual
> > route/prefix in the output.
> >
> > labrouter_a#sho ip route ospf | i TenGigabitEthernet2/1
> > [110/1035] via 1.1.1.1, 1d13h, TenGigabitEthernet2/1
> > [110/1035] via 1.1.1.1, 1d13h, TenGigabitEthernet2/1
> > [110/1033] via 1.1.1.1, 1d13h, TenGigabitEthernet2/1
> >
> > I need to see the route prefix in this display.
> > I use SCRT and have played around with terminal emulation by increasing
> > columns to 132 but no luck.
> >
> > thanks
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Fri Jan 20 2012 - 12:29:23 ART