Re: IOS output display for displaying routes learned from

Try this command:

show ip cef TenGigabitEthernet2/1

that should show you only the routes for that interface.

Hope that helps.

Tom Kacprzynski

On Fri, Jan 20, 2012 at 10:16 AM, Rocco Romeo <roccor21_at_hotmail.com> wrote:

> Hi guys, I'm trying to remember if there's a way in IOS to only show OSPF
> routes learned from a specific interface. When I | (pipe) include it will
> only
> show the interface and next hop learned from but will not include the
> actual
> route/prefix in the output.
>
> labrouter_a#sho ip route ospf | i TenGigabitEthernet2/1
> [110/1035] via 1.1.1.1, 1d13h, TenGigabitEthernet2/1
> [110/1035] via 1.1.1.1, 1d13h, TenGigabitEthernet2/1
> [110/1033] via 1.1.1.1, 1d13h, TenGigabitEthernet2/1
>
> I need to see the route prefix in this display.
> I use SCRT and have played around with terminal emulation by increasing
> columns to 132 but no luck.
>
> thanks
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Fri Jan 20 2012 - 11:10:04 ART