RE: Reachability - Interfaces not included

From: Aaron <aaron1_at_gvtc.com>
Date: Wed, 28 Dec 2011 09:03:45 -0600

I recall talking to a ccie recently that told me he didn't like the proctor
that I had a good experience with. I guess it's all in the way you look at
it and the way you approach the person and the way you word the question to
the proctor and what you expect of the proctor, etc.

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of Tom
Kacprzynski
Sent: Tuesday, December 27, 2011 10:33 PM
To: Jay McMickle
Cc: marc abel; Cisco certification; Joe Sanchez
Subject: Re: Reachability - Interfaces not included

Thanks everyone, that makes little more sense. The labs I'm going through
right now assumed that I had to redistribute those networks and find them
too.

Jay,
Good to hear only the nice proctors are left :) I'm sure the ones in RTP
are also very helpful.

Thanks

Tom

On Tue, Dec 27, 2011 at 9:28 PM, Joe Sanchez <marco207p_at_gmail.com> wrote:

> I would have to agree with Marc on this one. I don't believe there would
> be such, if they provide networks they more than likely will ask you to
> redistribute or advertise them in some way. however if you have questions
> don't be affraid to ask. I was affraid to ask, and lost a ton of
> points!!!!!! that won't happen again.
>
>
>
>
> On Tue, Dec 27, 2011 at 2:21 PM, marc abel <marcabel_at_gmail.com> wrote:
>
>> I would ask the proctor on that, I haven't seen much ambiguity in this
>> regard though.
>>
>> Yes, static map those frame interfaces.
>>
>> On Tue, Dec 27, 2011 at 2:16 PM, Tom Kacprzynski <tom.kac_at_gmail.com>
>> wrote:
>> > Hello,
>> > During the test you are asked to make sure to have full reachability.
If
>> > there are interfaces you were never asked to advertised internally or
>> > redistributed, what would you do?
>> > 1. Leave them and don't include them as part of the full reachability
>> test
>> > 2. Redistribute them as connected.
>> > 3. Ask the proctor.
>> >
>> > On a similar note what about Frame Relay directly connected interface,
>> > should those have a static mapping so they could can be pinged locally
>> or
>> > only if they are specified in the task requirements?
>> >
>> > Thank you,
>> >
>> > Tom
>> >
>> >
>> > Blogs and organic groups at http://www.ccie.net
>> >
>> > _______________________________________________________________________
>> > Subscription information may be found at:
>> > http://www.groupstudy.com/list/CCIELab.html
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Wed Dec 28 2011 - 09:03:45 ART

This archive was generated by hypermail 2.2.0 : Sun Jan 01 2012 - 08:27:01 ART