Re: Bidirectional NAT

Please post all relevant config, including what is the test that you did
to assert that it works in one direction but not in the other.
-Carlos

ccienovice_at_gmail.com @ 22/11/2011 20:05 -0300 dixit:
> Carlos,
>
> There is only one IP configured at server end.
> ------Original Message------
> From: Carlos G Mendioroz
> To: NiKhil
> Cc: ccielab_at_groupstudy.com
> Subject: Re: Bidirectional NAT
> Sent: Nov 23, 2011 04:32
>
> It might be that the server private address is not the primary address
> on it ? So it answers/gives service but does not use that address to
> originate ?
>
> -Carlos
>
> NiKhil @ 22/11/2011 14:20 -0300 dixit:
>> Hi,
>>
>> I have configured bidirectional NAT on ASA. The configuration is as follows:-
>>
>> ======================
>> nat (outside) 4 access-list OUT-TO-SVR outside
>> !
>> global (inside) 4 172.30.30.1
>> !
>> access-list OUT-TO-SVR extended permit ip any host 192.168.10.1
>> !
>> static (inside,outside) 192.168.10.1 172.30.10.1 netmask 255.255.255.255
>> ========================
>>
>> I am facing problem where the local ip is not getting translated to global but
>> from internet the server is reachable. To be precise, server can't access
>> internet but from internet the server is reachable.
>>
>> Please find the logs as follows:-
>>
>> %ASA-3-305005: No translation group found for icmp src INSIDE:172.30.10.1 dst
>> OUTSIDE:74.125.236.144 (type 8, code 0)
>>
>> Thanks in advance
>>
>> Regards,
>> Nick
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>>
>>
>>
>>
>>
>

-- 
Carlos G Mendioroz  <tron_at_huapi.ba.ar>  LW7 EQI  Argentina
Blogs and organic groups at http://www.ccie.net