Re: OER Active Probes

I notice that it seems to take a few minutes for the probes to pick
up... maybe some patience.
Did you try a debug oer border active probe?

Do you have the whole "learn" subsection somewhere?

-Rich

On Wed, Sep 28, 2011 at 9:25 PM, Steven Blasiol
<steven.blasiol_at_gmail.com> wrote:
> Can anyone tell me why when I issue the "show oer master active-probes" or
> "show oer border active-probes" command I see nothing? Below is my master
> config, border is just the OER basics...
>
>
> oer master
> policy-rules OER
> logging
> !
> border 19.19.2.2 key-chain OER
> interface Serial0/0 external
> interface FastEthernet0/1 external
> interface FastEthernet0/0 internal
> no max range receive
> mode route control
> mode select-exit best
> !
> !
> !
> oer-map OER 1
> match traffic-class prefix-list THREE3
> set loss threshold 10
> set active-probe echo 19.19.33.3
> set probe frequency 4
> !
> oer-map OER 2
> match traffic-class prefix-list THREE0
> set loss threshold 10
> set active-probe echo 19.19.30.3
> set probe frequency 4
> !
>
>
> --
> Steven M. Blasiol
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sun Oct 09 2011 - 22:25:15 ART