Re: IOS IPSec VPN - Software Client - How to config a banner

Banner command was introduced in IOS 12.4(2)T. Seems you have too old IOS.

Regards,

--
Piotr Matusiak
CCIE #19860 (R&S, Security), CCSI #33705
Technical Instructor
website: www.MicronicsTraining.com <http://www.micronicstraining.com/>
blog: www.ccie1.com
If you can't explain it simply, you don't understand it well enough -
Albert Einstein
2011/10/9 Group Study <gs_at_netengineer.org>
> Thanks but I don't have the banner command available... Here's my details:
>
> VPN-CISCO-LAB(config-isakmp-group)#?
> ISAKMP group policy config commands:
>  access-restrict    Restrict clients in this group to an interface
>  acl                Specify split tunneling inclusion access-list number
>  backup-gateway     Specify backup gateway
>  dns                Specify DNS Addresses
>  domain             Set default domain name to send to client
>  exit               Exit from ISAKMP client group policy configuration mode
>  firewall           Enforce group firewall feature
>  group-lock         Enforce group lock feature
>  include-local-lan  Enable Local LAN Access with no split tunnel
>  key                pre-shared key/IKE password
>  max-logins         Set maximum simultaneous logins for users in this group
>  max-users          Set maximum number of users for this group
>  netmask            netmask used by the client for local connectivity
>  no                 Negate a command or set its defaults
>  pfs                The client should propose PFS
>  pool               Set name of address pool
>  save-password      Allows remote client to save XAUTH password
>  split-dns          DNS name to append for resolution
>  wins               Specify WINS Addresses
>
> VPN-CISCO-LAB(config-isakmp-group)#do sh ver | i adv
> System image file is "flash:c2800nm-adventerprisek9-mz.123-14.T4.bin"
> VPN-CISCO-LAB(config-isakmp-group)#
>
>
> On Sat, Oct 8, 2011 at 9:28 AM, Piotr Matusiak <pitt2k_at_gmail.com> wrote:
> > Hi,
> >
> >
>
http://www.cisco.com/en/US/docs/ios/12_2t/12_2t8/feature/guide/ftunity.html#w
p1153004
> >
> > Regards,
> > --
> > Piotr Matusiak
> > CCIE #19860 (R&S, Security), CCSI #33705
> > Technical Instructor
> > website: www.MicronicsTraining.com <http://www.micronicstraining.com/>
> > blog: www.ccie1.com
> >
> > If you can't explain it simply, you don't understand it well enough -
> > Albert Einstein
> >
> >
> > 2011/10/8 Group Study <gs_at_netengineer.org>
> >>
> >> I have a router that I'm using as a VPN device for the Cisco IPSec
> >> Software VPN client... I want to add a banner so when people login
> >> they can see a message...
> >>
> >> any links to get this done? tried the googles but couldn't find what
> >> I'm looking for.
> >>
> >> Thanks in advance.
> >>
> >>
> >> Blogs and organic groups at http://www.ccie.net
> >>
> >> _______________________________________________________________________
> >> Subscription information may be found at:
> >> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net