all the routers are in area 0
From: robclav_at_gmail.com
Date: Tue, 4 Oct 2011 12:33:01 +0200
Subject: Re: OSPF Neighborship
To: go_soon2010_at_hotmail.com
CC: manouchehr1979_at_gmail.com; ccielab_at_groupstudy.com
Stub area? then establishing default-metric to modify the metric for the selfinjected default route?
2011/10/4 Iam Here <go_soon2010_at_hotmail.com>
I'd like R2 and R3 to inject only default route with different metric to R1 to work as Active/Standby
but don't like R2 or R3 to get the default route of each other so i asked to prevent the neighborship between R2 and R3 Does that work ?
Date: Tue, 4 Oct 2011 05:20:51 -0500
Subject: Re: OSPF Neighborship
From: manouchehr1979_at_gmail.com
To: go_soon2010_at_hotmail.com
CC: ccielab_at_groupstudy.com
Use NBMA network type.
On Tue, Oct 4, 2011 at 5:12 AM, Iam Here <go_soon2010_at_hotmail.com> wrote:
I have 3 routers in the same subnet (same Switch) and I'd like R1 to make neighborship with R2 and R3 only
in other words R2 and R3 can't establish any neighborship
Blogs and organic groups at http://www.ccie.net
Received on Tue Oct 04 2011 - 13:34:48 ART
This archive was generated by hypermail 2.2.0 : Tue Nov 15 2011 - 13:10:29 ART