Re: EIGRP neighbor relation over a tunnel interface

and the EIGRP neighbor are still not up?

What does your topology look like. Are there more then one path the
the destinations? What does you EIGRP configs look like?

On Sat, Sep 24, 2011 at 3:29 PM, amin <amin_at_axizo.com> wrote:

> I turn on keep alive on the tunnel, it keeps on, even I can ping each
> other through the tunnel interfaces.****
>
> ** **
>
> *From:* me you [mailto:anunda19_at_gmail.com]
> *Sent:* Saturday, September 24, 2011 1:56 PM
> *To:* amin
> *Cc:* ccielab_at_groupstudy.com
> *Subject:* Re: EIGRP neighbor relation over a tunnel interface****
>
> ** **
>
> what Interfaces are your tunnels destination on your router? And do you
> can connectivity between the two destination IP address. ****
>
> ** **
>
> By default GRE tunnels do not have keepalives on. if you turn on
> keep alive you should see the tunnel Drop. ****
>
> ** **
>
> Rob****
>
> On Sat, Sep 24, 2011 at 3:06 PM, amin <amin_at_axizo.com> wrote:****
>
> Hi experts,
>
>
>
> I have a problem establishing eigrp relation over a tunnel , even the
> tunnel
> is up and participating under the eigrp process, but R2 can see R1, while
> R1
> can't see R2?? Any advice
>
>
>
> R1
>
> interface Tunnel40
>
> ip address 192.168.230.105 255.255.255.252
>
> tunnel source Serial0/1/0:1
>
> tunnel destination 192.168.71.2
>
>
>
> R2
>
> interface Tunnel0
>
> ip address 192.168.230.106 255.255.255.252
>
> tunnel source 192.168.71.2
>
> tunnel destination 10.10.10.102
>
>
>
> Regards,
>
> Amin
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
> ****
>
> ** **

Blogs and organic groups at http://www.ccie.net
Received on Sat Sep 24 2011 - 15:45:52 ART