RE: EIGRP neighbor relation over a tunnel interface

I turn on keep alive on the tunnel, it keeps on, even I can ping each other
through the tunnel interfaces.

From: me you [mailto:anunda19_at_gmail.com]
Sent: Saturday, September 24, 2011 1:56 PM
To: amin
Cc: ccielab_at_groupstudy.com
Subject: Re: EIGRP neighbor relation over a tunnel interface

what Interfaces are your tunnels destination on your router? And do you can
connectivity between the two destination IP address.

By default GRE tunnels do not have keepalives on. if you turn on keep alive
you should see the tunnel Drop.

Rob

On Sat, Sep 24, 2011 at 3:06 PM, amin <amin_at_axizo.com> wrote:

Hi experts,

I have a problem establishing eigrp relation over a tunnel , even the tunnel
is up and participating under the eigrp process, but R2 can see R1, while R1
can't see R2?? Any advice

R1

interface Tunnel40

 ip address 192.168.230.105 255.255.255.252

tunnel source Serial0/1/0:1

 tunnel destination 192.168.71.2

R2

interface Tunnel0

ip address 192.168.230.106 255.255.255.252

tunnel source 192.168.71.2

 tunnel destination 10.10.10.102

Regards,

Amin

Blogs and organic groups at http://www.ccie.net
Received on Sat Sep 24 2011 - 13:59:17 ART