Re: OT- Cisco mobile 8.1

We run UCM, so I'm not sure about the CME side of the house, and I don't work
on our voice team to tell you. It is a special configuration, though.
 
I
woud ask that you reach out to TAC as this group isn't the place for support
outside of the CCIE studies.
 
Thanks for your understanding. Good luck!

 
Regards,
Jay McMickle- CCNP, CCSP, CCDP, MCSE
http://mycciepursuit.wordpress.com/

From: amin <amin_at_axizo.com>
To: 'Jay
McMickle' <jay.mcmickle_at_yahoo.com>; 'Radioactive Frog' <pbhatkoti_at_gmail.com>
Cc: ccielab_at_groupstudy.com
Sent: Thursday, September 15, 2011 9:46 AM
Subject:
RE: OT- Cisco mobile 8.1

What type do I have to specify under the ephone?
 
From:Jay McMickle [mailto:jay.mcmickle_at_yahoo.com]
Sent: Thursday, September
15, 2011 4:56 PM
To: Radioactive Frog; amin
Cc: ccielab_at_groupstudy.com
Subject: OT- Cisco mobile 8.1
 
I can confirm that, too. We're using
AnyConnect on our iPhones with Cisco Mobile 8.1. Works well if you'll deploy
pcks12 certs on your phone so that they don't go to "sleep" and remain
connected. We're also testing the trusted network detection and connect on
demand. When you open the Mobile 8.1, it kicks off the AnyConnect client and
remains connected with the certs as the keepalive.
 
Cool stuff.
 
Changed the
topic to OT as this is a CCIE R&S Study Group, none of which, this falls
within.
 
 
Regards,
Jay McMickle- CCNP, CCSP, CCDP, MCSE
http://mycciepursuit.wordpress.com/
 
 
From:Radioactive Frog
<pbhatkoti_at_gmail.com>
To: amin <amin_at_axizo.com>
Cc: ccielab_at_groupstudy.com
Sent: Thursday, September 15, 2011 2:01 AM
Subject: Re: Cisco mobile 8.1
absolutely... it works with CUCM.

On Thu, Sep 15, 2011 at 4:58 PM, amin
<amin_at_axizo.com> wrote:

> Hi experts,
>
> Can I operate Cisco mobile software
(as an ip phone) on the I-phone?
>
> Regards,
>
> Amin
>
>
> Blogs and organic
groups at http://www.ccie.net
>
>
Received on Thu Sep 15 2011 - 08:07:41 ART