Re: GNS3 ASA active/active failover issue

I tried with dynagen/qemu instead of GNS3. Active/Active failover is working
just fine, and no ping related issues were found. I think there are some
issues with qemu, which is integrated with GNS3.

Regards,
Myung-Soo

2011/9/9 Myung-Soo Ko <bacchus21_at_gmail.com>

> Hello, Ash
>
> Thank you so much for your reply. I tried to find the related information
> so hard but wasn't able to get any satisfying info. Actually, I gave up
> using GNS3 and started using dygen+qemu instead.
>
> Thank you again for your comments
>
> Regards,
> Myung-Soo
>
> 2011/9/9 ahotbot ahotbot <ahotbot1_at_gmail.com>
>
>> Hey,
>>
>> I've never used GNS so you'll need to look this one up yourself. I tend to
>> use dynamips/dynagen + quemu + vmware.
>>
>> The Qemu version I was look at was 0.12.x on a windows platform which I've
>> just discovered is quite old now. I didn't get much time to port the ASA
>> image over to this new version as it required PCAP if i remember correctly.
>>
>>
>> regards
>> Ash
>>
>>
>> 2011/9/8 Myung-Soo Ko <bacchus21_at_gmail.com>
>>
>>> Hello, ahotbot
>>>
>>> Thank you for reply. I'm currently using GNS3 v0.7.4 all-in-one for
>>> Windows. Could you please let me know which version of Qemu is the one has
>>> the code fixed? Is it for Windows, or linux?
>>>
>>> Thank you in advance,
>>> Regards,
>>> Myung-Soo
>>>
>>>
>>> 2011/9/8 ahotbot ahotbot <ahotbot1_at_gmail.com>
>>>
>>>> I had the same issue with testing the active/active and active/standby.
>>>> I tracked it down to MAC address not being swapped over successfully by the
>>>> two instances of Qemu. The latest version of Qemu seems to have code to fix
>>>> this issue but I didn't get enough time to try it with the ASA images.
>>>>
>>>>
>>>>
>>>> On Tue, Sep 6, 2011 at 11:37 AM, Myung-Soo Ko <bacchus21_at_gmail.com>wrote:
>>>>
>>>>> Hello, Group
>>>>>
>>>>> I'm having a GNS3 ASA active/active failover issue when I enable
>>>>> active/active failover on the ASA. After enabling failover ping
>>>>> through ASA
>>>>> stops.
>>>>>
>>>>> The failover works fine and the replication is working fine as well but
>>>>> any
>>>>> traffic doesn't pass through the ASA. Even I can't ping the inside
>>>>> interface
>>>>> of the ASA.
>>>>> Looks like I completely lost connectivity to the ASA except for the
>>>>> console
>>>>> connection.
>>>>> Can anybody help?
>>>>>
>>>>> Thanks in advance,
>>>>> ----------------------------------------------
>>>>> "An open mind opens doors."
>>>>> 夢は信じていれば必ず叶う瘢雹！！！
>>>>> Myung-Soo Ko (高 巳６柑洙)
>>>>>
>>>>>
>>>>> Blogs and organic groups at http://www.ccie.net
>>>>>
>>>>> _______________________________________________________________________
>>>>> Subscription information may be found at:
>>>>> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Fri Sep 09 2011 - 13:18:43 ART