RE: checking DSCP marking on the traffic

Thanx..

But I am looking for something that shows that marking on the traffic

>-----Original Message-----
>From: JB Poplawski [mailto:jb.poplawski_at_gmail.com]
>Sent: Thursday, September 08, 2011 5:20 PM
>To: BALAKRISHNAN Balaji
>Subject: Re: checking DSCP marking on the traffic
>
>show policy-map int
>
>You should see hit counts on the show commands.
>JB
>
>
>On Thu, Sep 8, 2011 at 3:49 PM, BALAKRISHNAN Balaji
><Balaji.BALAKRISHNAN_at_swift.com> wrote:
>> Hi all,
>>
>> Struggling to find any show or debug commands that would tell you the DSCP
>> setting/marking on the traffic. Following is the sample configs,
>>
>>
>> policy-map PM-FIN
>> class class-default
>> set ip dscp af11
>> !
>> interface GigabitEthernet1/3
>> service-policy input PM-FIN
>> !
>> class-map match-all CM-FIN
>> match ip dscp af11
>> !
>> policy-map PM-child
>> class CM-FIN
>> bandwidth percent 40
>> class class-default
>> bandwidth percent 60
>> !
>> policy-map PM-parent
>> class class-default
>> shape average 1000000
>> service-policy PM-child
>>
>> !
>> interface GigabitEthernet0/3
>> service-policy output PM-parent
>>
>>
>>
>> How do I verify that the traffic coming on the Gig 1/3 correctly marked with
>> af11 and correctly matched by the class CM-FIN ??
>>
>> Thanx for the help.
>>
>>
>> Rgds
>> Bala
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Thu Sep 08 2011 - 23:52:47 ART