Re: checking DSCP marking on the traffic

Running the command "show policy-map interface Gi0/3" will show you
the counters increasing.

--
Marko Milivojevic - CCIE #18427
Senior Technical Instructor - IPexpert
FREE CCIE training: http://bit.ly/vLecture
Mailto: markom_at_ipexpert.com
Telephone: +1.810.326.1444
Web: http://www.ipexpert.com/
On Thu, Sep 8, 2011 at 13:49, BALAKRISHNAN Balaji
<Balaji.BALAKRISHNAN_at_swift.com> wrote:
> Hi all,
>
> Struggling to find any show or debug commands that B would tell you the DSCP
> setting/marking on the traffic. B  Following is the sample configs,
>
>
> policy-map PM-FIN
> class class-default
> B  set ip dscp af11
> !
> interface GigabitEthernet1/3
> service-policy input PM-FIN
> !
> class-map match-all CM-FIN
> match ip dscp af11
> !
> policy-map PM-child
> class CM-FIN
> B bandwidth percent 40
> class class-default
> B bandwidth percent 60
> !
> policy-map PM-parent
> B class class-default
> B shape average 1000000
> B service-policy PM-child
>
> !
> interface GigabitEthernet0/3
> service-policy output PM-parent
>
>
>
> How do I verify that the traffic coming on the Gig 1/3 correctly marked with
> af11 and B correctly matched by the class CM-FIN ??
>
> Thanx for the help.
>
>
> Rgds
> Bala
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net