Re: is auto qos voip command only for frame interface ?

Hey Imran - I should have been more specific - AutoQoS is supported on
Ethernet interfaces on switches, but evidently not on routers

Q. What interfaces currently support Cisco AutoQoS?
A. Router platforms: Cisco serial (PPP/HDLC), Frame Relay DLCIs and ATM VCs
on the router platforms
Switch Platforms: Ethernet, Static, Dynamic-access, Voice VLAN access, and
Trunk ports

http://www.cisco.com/en/US/technologies/tk543/tk879/technologies_qas0900aecd8020a589.html

On Sun, Aug 28, 2011 at 4:13 PM, Steve Di Bias <sdibias_at_gmail.com> wrote:

> Hey Imran,
>
> AutoQoS - is also called AutoQoS for the Enterprise
>
>
> http://www.cisco.com/en/US/docs/ios/12_3t/12_3t7/feature/guide/ftautoq2.html#wp1090356
>
> AutoQoS voip is for automating your Voice over IP QoS configs
>
>
> http://www.cisco.com/en/US/docs/ios/12_2t/12_2t15/feature/guide/ftautoq1.html
>
>
> you can enable on Ethernet interface :)
>
>
> On Sun, Aug 28, 2011 at 4:04 PM, imran ali <immrccie_at_gmail.com> wrote:
>
>> hi
>>
>> can we apply apply auto qos voip comamnd on regular ethernet interface ?
>>
>> whats the difference between just " auto qos " and " auto qos voip "
>> command ?
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>>
>>
>>
>>
>>
>>
>
>
> --
> -Steve Di Bias
>

-- 
-Steve Di Bias
Blogs and organic groups at http://www.ccie.net