Re: Quick question on Flex links

You can configure it on both switches the configuration is local to the
switch but I would not advise it. When you configure the a link with flex
feature you are disabling spanning tree on both ports. It's ok to do it on
one side of an access switch but on both you might be running into problems
depending on what you topology looks like.

On Thu, Aug 18, 2011 at 2:47 PM, Persio Pucci <persio_at_gmail.com> wrote:

> Hi all,
>
> really don't have a lab available here so I wanted to ask anybody that had
> this experience. Is there any problem to use flex links with both line
> ending on the same devices? For example, CatA has G0/1 and G0/2 as
> active/back and CatB has G0/1 and G0/2 as active/backup. Does it work that
> way? Cisco examples only cover backups to different switches.
>
> Persio
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Fri Aug 19 2011 - 13:00:00 ART