RE: How would you solve this task?

If you use login on-success and on-failure it will log these as it indicates.
If you DO NOT LOGIN and it times out, it will log nothing.

The requirement, Configure R19 as needed such that telnet access is logged has not been completed.

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of Daniel Dib
Sent: 08 August 2011 21:03
To: ccielab_at_groupstudy.com
Subject: How would you solve this task?

Hi please advise me on this task. I did an ASET TS lab which seems to be
quite similar to real lab TS. This was one task. How would you configure the
statement below?

"R19 should be logging all telnet access attempts, successful or not.
Configure R19 as needed such that telnet access is logged."

The solution guide used an ACL bound to the VTY which logs all traffic
hitting VTY. Sure, this will show if people are trying to telnet but nothing
if session was successful or not. My solution was to use the login
on-failure and login on-success feature. That would probably mean lost
points for me, what do you think?

Best regards,

Daniel

Blogs and organic groups at http://www.ccie.net
Received on Mon Aug 15 2011 - 10:56:11 ART