This task clearly requires a vacl - "entering" vlan X, Y, Z
"leaving" I could see a interface vlan X access-list - but that would not fulfill the task requirements.
I would use option B from below as my "action drop" sequence (10) in my vacl (permit to be dropped) then an open permit in seq 20 "action forward".
What were you thinking?
-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of Shaun Gomez (4g1vn)
Sent: Sunday, August 14, 2011 8:06 PM
To: Cisco certification
Subject: Wording of task
Based on the task and the phrasing woudl you go with option (A) or (B) and
why.
Thanks!
On SW2, prevent all DHCP client requests from entering or leaving VLANs 100,
200, and 300.
7 All BOOTP requests should be dropped; all other traffic should be
forwarded.
Option (A)
access-list 100 permit udp any eq bootpc any eq bootps
Option (B)
access-list 100 permit udp any any eq bootps
access-list 100 permit udp any any eq bootpc
Blogs and organic groups at http://www.ccie.net
Received on Mon Aug 15 2011 - 08:12:15 ART
This archive was generated by hypermail 2.2.0 : Thu Sep 01 2011 - 06:05:56 ART