Re: OT: BGP failing to establish a peer. Any ideas?

From: Marko Milivojevic <markom_at_ipexpert.com>
Date: Fri, 5 Aug 2011 20:30:05 -0700

I just quickly labbed this and on 12.4T, the message is verbose, so I
was not correct. However, the switch may behave differently and
holdtime of 9 seconds is very aggressive for BGP. I would definitely
try without that to see what happens.

--
Marko Milivojevic - CCIE #18427
Senior Technical Instructor - IPexpert
FREE CCIE training: http://bit.ly/vLecture
Mailto: markom_at_ipexpert.com
Telephone: +1.810.326.1444
Web: http://www.ipexpert.com/
On Fri, Aug 5, 2011 at 20:25, Marko Milivojevic <markom_at_ipexpert.com> wrote:
> Ahhh, that's a good point! That made me take a second look at the
> configuration. This behavior can be caused if you use aggressive
> timers and the remote end is rejecting the session as a result.
>
> Try removing " neighbor 10.255.0.10 timers 3 9" and see what happens.
>
>
> --
> Marko Milivojevic - CCIE #18427
> Senior Technical Instructor - IPexpert
>
> FREE CCIE training: http://bit.ly/vLecture
>
> Mailto: markom_at_ipexpert.com
> Telephone: +1.810.326.1444
> Web: http://www.ipexpert.com/
>
> On Fri, Aug 5, 2011 at 19:47, Kenneth Ratliff <lists_at_cluebat.net> wrote:
>> On 08/05/2011 10:03 PM, Dave Serra wrote:
>>> 10.255.0.10 6/0 (cease)
>>
>> That's the important part, the 6/0. That means the remote neighbor is sending an error code 6, which is Cease. However, it's not sending a sub-code. The Cease Notification subcodes are handled by RFC 4486, but unfortunately, they're not mandatory parts of the BGP spec.
>>
>>
>> B 1 B  B  B  B Maximum Number of Prefixes Reached
>> B  B  B  B  B 2 B  B  B  B Administrative Shutdown
>> B  B  B  B  B 3 B  B  B  B Peer De-configured
>> B  B  B  B  B 4 B  B  B  B Administrative Reset
>> B  B  B  B  B 5 B  B  B  B Connection Rejected
>> B  B  B  B  B 6 B  B  B  B Other Configuration Change
>> B  B  B  B  B 7 B  B  B  B Connection Collision Resolution
>> B  B  B  B  B 8 B  B  B  B Out of Resources
>>
>>
>> Those are the subcodes, so one of those is likely the problem. Depending on what it is, the problem may be in the remote configuration, not on your end.
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
Received on Fri Aug 05 2011 - 20:30:05 ART

This archive was generated by hypermail 2.2.0 : Thu Sep 01 2011 - 06:05:56 ART