Re: Port-Security MAC address issue

thanks Guys

Can I reduce it to less then a minute, it seems like one minute is the
minimum you can configure. Is this right ?

On Wed, Aug 3, 2011 at 4:50 PM, Jason Lunde <willroute4food_at_gmail.com>wrote:

> Yes, I think by default it will be set to absolute aging with a 0 time
> (which essentially disables aging). You will need to set the absolute aging
> time to like a minute if thats what you desire.
>
> On Wed, Aug 3, 2011 at 7:17 AM, Irfan Sid <lifeoverip_at_gmail.com> wrote:
>
>> I am having ane issue with port-security, in that when a user moves his
>> laptop from one desk to another, i have to clear off their mac-address
>> from
>> the old port before they can plug into the new port.
>>
>> With my port-security configuration this shouldnt happen, as I am not
>> using
>> MAC-address sticky command. So when the user unplugs his laptop from a
>> switchport the mac-address should immediately cleared off. This will allow
>> him to use that mac-address (Laptop) on anotehr port. But this is not
>> happening and each time I have to log on and clear the mac-address off the
>> old port before user can use the new port.
>>
>> interface GigabitEthernet0/xx
>> switchport access vlan 100
>> switchport mode access
>> switchport port-security maximum 2
>> switchport port-security
>> switchport port-security violation
>> spanning-tree portfast
>> spanning-tree bpduguard enable
>>
>>
>> Please advise.
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Wed Aug 03 2011 - 16:52:19 ART