Re: XMODEM

you can use following commands as an example

IP_ADDRESS=172.16.1.1
IP_SUBNET_MASK=255.255.255.0
DEFAULT_GATEWAY=172.16.1.1
TFTP_SERVER=172.16.1.2
TFTP_FILE=c1841-ipbasek9-mz.124-24.T.bin

then
tftpdnld -r will download and boot from mem, it will not save downloaded ios
to flash if you used -r option. This is particular useful if you are
suspected of a partially failed flash/storage medium.

HTH

On Fri, Jul 22, 2011 at 1:35 PM, muhammad adnan <taurusadnan19_at_gmail.com>wrote:

> on the router you can configure Tftp parameters to download the ios but on
> the Switch i didnt see any tftp commad to configure TFTP parameters
>
>
>
> On Fri, Jul 22, 2011 at 3:25 PM, john rose <jhnrose401_at_gmail.com> wrote:
>
> > Dear
> >
> > Is there any alternative method is avalable instead of Xmodem
> >
> > On Fri, Jul 22, 2011 at 1:22 PM, muhammad adnan <taurusadnan19_at_gmail.com
> >wrote:
> >
> >> Dear
> >> 1)Access the switch consol with any softwear
> >> 2)* Issue commad at mode Switch: copy xmodem: flash: your IOS NAME
> >> 3) then Click on the Transfer button on the softwear
> >> 4) then select the send file option and browse the file name of IOS
> >> 5)then wait for 2hours :)
> >>
> >>
> >>
> >> Thanks
> >> Muhammad Adnan
> >> CCIE 22339
> >> *
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> On Fri, Jul 22, 2011 at 2:51 PM, john rose <jhnrose401_at_gmail.com>
> wrote:
> >>
> >>> Dear
> >>>
> >>> I am in Switch: mode my 3750 show me
> >>> Switch: ( what we called this mode ?) and in mode how i upload the IOS
> >>> to
> >>> my switch in this mode.
> >>> 2. when i telnet to my neigbor router i am checking the bgp
> connectivity
> >>>
> >>> example telnet 1.1.1.1 179
> >>> how i disconnect the telnet session
> >>>
> >>> Thanks
> >>> On Thu, Jul 21, 2011 at 4:31 PM, Michael Kiefer <mjkiefer_at_gmail.com>
> >>> wrote:
> >>>
> >>> > Try hyperterm or teraterm. They have it.
> >>> >
> >>> > On Thu, Jul 21, 2011 at 8:48 AM, <jhnrose401_at_gmail.com> wrote:
> >>> >
> >>> > > Dear
> >>> > >
> >>> > > I am trying to install the image into my C3750 switch and i am in
> the
> >>> ROM
> >>> > > Monitor
> >>> > > I am trying to install using using XMODEM.
> >>> > >
> >>> > >
> >>> > >
> >>> >
> >>>
> http://www.cisco.com/en/US/products/hw/switches/ps607/products_tech_note09186a0080094955.shtml
> >>> > >
> >>> > > Putty doesnt support Xmoden is there is another way to install the
> >>> image
> >>> > > using
> >>> > > putty.
> >>> > >
> >>> > > Plz help
> >>> > >
> >>> > > Thanks
> >>> > >
> >>> > >
> >>> > > Blogs and organic groups at http://www.ccie.net
> >>> > >
> >>> > >
> >>> _______________________________________________________________________
> >>> > > Subscription information may be found at:
> >>> > > http://www.groupstudy.com/list/CCIELab.html
> >>> >
> >>> >
> >>> > Blogs and organic groups at http://www.ccie.net
> >>> >
> >>> >
> _______________________________________________________________________
> >>> > Subscription information may be found at:
> >>> > http://www.groupstudy.com/list/CCIELab.html
> >>>
> >>>
> >>> Blogs and organic groups at http://www.ccie.net
> >>>
> >>> _______________________________________________________________________
> >>> Subscription information may be found at:
> >>> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Fri Jul 22 2011 - 14:03:14 ART