Re: IPv6 BGP

how aboutshow ip bgp ipv6 unicast ?

On 7/15/2011 3:51 PM, marc edwards wrote:
> experts:
>
> I have configured a pretty basic set up but having issues advertising
> some routes. I have R1 ---FR---> R4
>
> R1 has many loopbacks setup on lo 1:
>
>
> r1#sh run int lo1
> Building configuration...
>
> Current configuration : 311 bytes
> !
> interface Loopback1
> ip address 1.1.1.1 255.255.255.255
> ipv6 address FEC0:10:10::1/64
> ipv6 address FEC0:10:11::1/64
> ipv6 address FEC0:10:12::1/64
> ipv6 address FEC0:10:13::1/64
> ipv6 address FEC0:10:14::1/64
> ipv6 address FEC0:10:15::1/64
> ipv6 address FEC0:10:16::1/64
> ipv6 address FEC0:10:17::1/64
>
> I am trying to advertise these networks over to R4 with following
> configuration on R1:
>
> router bgp 1
> no synchronization
> bgp log-neighbor-changes
> neighbor FEC0:124::131 remote-as 4
> no auto-summary
> !
> address-family ipv6
> neighbor FEC0:124::131 activate
> network FEC0:124::/64
> no synchronization
> exit-address-family
>
> I guess the problem must be on r1 because I don't see the advertised
> network hitting it's own bgp table
>
> r1#sh ip bgp
>
> r1#
>
> Pretty cool that the same show commands can work for both ipv4 and
> ipv6 in BGP. I just wish I had something to show for it (no pun
> intended). Any suggestions? Thanks greatly in advance for help.
>
> Marc Edwards
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Fri Jul 15 2011 - 17:15:05 ART