RE: Web traffic route

I don't think you have designed the use of policy routing well or understand
the feature - route by any layer 3 or layer 4 packet field, where standard
routing is simply by IP destination.

Policy routing works independently of how your router learns ip destination
networks... so please post in very clear terms what you are trying to do and
the configuration of all routers (use pastebin and make a link if necessary).
We'll figure it out

-joe

From: sameer inam [mailto:i_sameer_at_hotmail.com]
Sent: Tuesday, July 05, 2011 6:55 AM
To: gtosh_at_aeneas.net; Joseph L. Brunner; ccielab_at_groupstudy.com
Subject: RE: Web traffic route

its not working for me , actually I m using BGP between two sites , site-A has
two connection one for internet and other one is for BGP connection with
internal branches sites ....and what i m trying is to route www traffic via
bgp from site B to site A to use there internet connection .

Kind regards,

Sameer

> Date: Wed, 29 Jun 2011 08:01:31 -0500
> Subject: RE: Web traffic route
> From: gtosh_at_aeneas.net
> To: joe_at_affirmedsystems.com; i_sameer_at_hotmail.com; ccielab_at_groupstudy.com
>
> "Joseph L. Brunner" <joe_at_affirmedsystems.com> wrote:
>
> >Same deal here bro - I send junk http/https traffic off to a cable modem
and let my high value voip and signaling traffic use the T-1
> >
> >(from a live router right now)
> >
> >ip access-list extended use-twc-policy
> > permit tcp 192.168.1.0 0.0.0.255 any eq www
> > permit tcp 192.168.1.0 0.0.0.255 any eq 443
> >
> >route-map int-f0/1-policy-route permit 10
> > match ip address use-twc-policy
> > set ip next-hop 24.108.91.65
> > set interface Vlan100
> >
> >
> >interface FastEthernet0/1
> > description Lan-Inside
> > ip address 192.168.1.1 255.255.255.0
> > ip nat inside
> > ip inspect fwpolicy in
> > ip inspect fwpolicy out
> > ip virtual-reassembly
> > ip policy route-map int-f0/1-policy-route
> >
> >-----Original Message-----
> >From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
sameer inam
> >Sent: Wednesday, June 29, 2011 2:35 AM
> >To: ccielab_at_groupstudy.com
> >Subject: Web traffic route
> >
> >Experts,
> >I m trying to send the www traffic to my second internet link , which has
NAT
> >configured but some reason traffic is not go through please see below the
> >config ....if any one can help me on that .
> >
> >Thanks in advance
> >
> >interface fastethernet 0/0 Des WAN link
> >
> >!interface FastEthernet0/1Des LAN ip address 10.0.98.1 255.255.255.0 ip
> >policy route-map web speed 100 full-duplex!
> >ip access-list extended webtraffic permit tcp 10.0.98.0 0.0.0.255 any eq
www!
> >
> >route-map web permit 10 match ip address webtraffic set ip next-hop
> >172.168.0.10 ( next hope router WAN address which is connected through
> >MPLS-BGP )
> >
> >
> >KInd regards,
> >Sameer
> >
> >
> >Blogs and organic groups at http://www.ccie.net
> >
> >_______________________________________________________________________
> >Subscription information may be found at:
> >http://www.groupstudy.com/list/CCIELab.html
> >
> >
> >Blogs and organic groups at http://www.ccie.net
> >
> >_______________________________________________________________________
> >Subscription information may be found at:
> >http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Wed Jul 06 2011 - 02:04:32 ART