Re: RSPAN - Router 2851

*1. **enable*

*2. **configure* *terminal*

*3. **ip traffic-export profile **profile-name*

*4. **interface **interface-name*

*5. **bidirectional*

*6. **mac-address* *H.H.H*

*7. **incoming* {*access-list* {*standard* | *extended* | *named*} | *sample
one-in-every* *packet-number*}

*8. **outgoing* {*access-list* {*standard* | *extended* | *named*} | *sample
one-in-every* *packet-number*}

*9. **exit*

*10. **interface* *type* *number*

*11. **ip traffic-export apply **profile-name*
mac address of the wireshare station

Kind regards,

Maarten Vervoorn
CCIE#27144

2011/7/1 Kaio Vilar <kaiovilar_at_gmail.com>

> Another question, what is the configuration command export IP traffic, to
> send traffic to an ip from a host with wireshark? because the documentation
> only tells how send traffic to another interface.
>
>
> 2011/7/1 Kaio Vilar <kaiovilar_at_gmail.com>
>
>> Master,
>>
>> Actually the feature is IPEXPORT, thanks for the help I will analyze the
>> Cisco doc.
>>
>> Regards,
>> Kaio Vilar
>>
>>
>> 2011/7/1 Alessandro Braga <sandro.unix_at_gmail.com>
>>
>>> Kaio,
>>>
>>> see table 2 below for more informations.
>>>
>>>
>>> http://www.cisco.com/en/US/prod/collateral/routers/ps259/prod_qas0900aecd802a9470_ps5854_Products_Q_and_A_Item.html
>>>
>>>
>>> Rgs,
>>> Alessandro Braga
>>>
>>>
>>> 2011/7/1 Alessandro Braga <sandro.unix_at_gmail.com>
>>>
>>>> Kaio,
>>>>
>>>> your EtherSwitch Module on 2851 supports RSPAN?
>>>>
>>>> Maarten,
>>>> 2851 Routers can support RSPAN if have a module with EtherSwitch Module.
>>>>
>>>>
>>>> rgs,
>>>> Alessandro Braga
>>>>
>>>>
>>>>
>>>> 2011/7/1 Maarten Vervoorn <mr.vervoorn_at_gmail.com>
>>>>
>>>>> Maybe you can use ip traffic export on a router to copy the traffic to
>>>>> another destination. SPAN sessions can only be created on switches
>>>>>
>>>>> Kind regards,
>>>>>
>>>>> Maarten Vervoorn
>>>>> CCIE#27144
>>>>>
>>>>> 2011/7/1 Kaio Vilar <kaiovilar_at_gmail.com>
>>>>>
>>>>> > Masters
>>>>> >
>>>>> > I need to configure a router 2851 with RSPAN, all traffic on an
>>>>> interface
>>>>> > should be directed to the ip xxxx, the IOS version I use is 12.4 25A
>>>>> > Advanced Security. Anyone remember configuration commands.
>>>>> >
>>>>> > Regards,
>>>>> > Kaio Vilar
>>>>> >
>>>>> >
>>>>> > Blogs and organic groups at http://www.ccie.net
>>>>> >
>>>>> >
>>>>> _______________________________________________________________________
>>>>> > Subscription information may be found at:
>>>>> > http://www.groupstudy.com/list/CCIELab.html
>>>>>
>>>>>
>>>>> Blogs and organic groups at http://www.ccie.net
>>>>>
>>>>> _______________________________________________________________________
>>>>> Subscription information may be found at:
>>>>> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Fri Jul 01 2011 - 23:31:52 ART