Re: Doc for 3550 Recovery using Rommon mode

From: Gaurav Thukral <pearlgaurav_at_gmail.com>
Date: Tue, 28 Jun 2011 10:30:27 +0530

Everythings works fine. IOS load properly but when i access it through
hyperterminal it stuck.

On Tue, Jun 28, 2011 at 10:25 AM, Roy Khan <roykhan123_at_hotmail.com> wrote:

> Nice to see you Brain :)
>
> > From: bdennis_at_ine.com
> > To: pearlgaurav_at_gmail.com
> > CC: ccielab_at_groupstudy.com
> > Date: Mon, 27 Jun 2011 18:16:57 -0500
> > Subject: Re: Doc for 3550 Recovery using Rommon mode
>
> >
> >
> http://www.cisco.com/en/US/products/hw/switches/ps628/products_tech_note091
> > 86a0080169696.shtml
> >
> > If you are still having problems send me an email direct with the exact
> > steps you are using to try and load the image on.
> >
> > Good luck with your studies!
> >
> > Brian Dennis, CCIEx5 #2210 (R&S/ISP-Dial/Security/SP/Voice)
> > bdennis_at_ine.com
> >
> > Internetwork Expert, Inc.
> > http://www.INE.com <http://www.ine.com/>
> >
> >
> >
> >
> > On 6/27/11 12:39 PM, "Gaurav Thukral" <pearlgaurav_at_gmail.com> wrote:
> >
> > >i am getting following error
> > >
> > >switch: copy xmodem: flash:c3550-ipservices-mz.122-44.SE6.bin
> > >Begin the Xmodem or Xmodem-1K transfer now...
> > >CCCCxmodem:: I/O error
> > >switch:
> > >
> > >On Tue, Jun 28, 2011 at 1:02 AM, Tony Schaffran (GS) <
> > >groupstudy_at_cconlinelabs.com> wrote:
> > >
> > >> You will need to use xmodem to copy an image through your terminal
> > >> software.
> > >>
> > >> I suggest you first set the baud rate to 115200 and load the smallest
> > >>IOS
> > >> image you can find to get it back to operational then load the final
> > >>image.
> > >>
> > >>
> > >> Tony Schaffran
> > >> Sr. Network Consultant
> > >> CCIE #11071
> > >> CCNP, CCNA, CCDA,
> > >> NNCDS, NNCSS, CNE, MCSE
> > >>
> > >>
> > >> -----Original Message-----
> > >> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf
> Of
> > >> Gaurav Thukral
> > >> Sent: Monday, June 27, 2011 10:41 AM
> > >> To: Group study
> > >> Subject: Doc for 3550 Recovery using Rommon mode
> > >>
> > >> Hi Experts,
> > >>
> > >> please suggest me any link for 3550 switch IOS recovery using rommon
> > >>mode
> > >>
> > >> --
> > >> Thanks & Regards,
> > >> Gaurav Thukral
> > >>
> > >>
> > >> Blogs and organic groups at http://www.ccie.net
> > >>
> > >>
> _______________________________________________________________________
> > >> Subscription information may be found at:
> > >> http://www.groupstudy.com/list/CCIELab.html
> > >>
> > >>
> > >>
> > >>
> > >>
> > >>
> > >>
> > >>
> > >>
> > >
> > >
> > >--
> > >Thanks & Regards,
> > >Gaurav Thukral
> > >
> > >
> > >Blogs and organic groups at http://www.ccie.net
> > >
> > >_______________________________________________________________________
> > >Subscription information may be found at:
> > >http://www.groupstudy.com/list/CCIELab.html
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> >
> >
> >
> >
> >
>

-- 
Thanks & Regards,
Gaurav Thukral
Blogs and organic groups at http://www.ccie.net
Received on Tue Jun 28 2011 - 10:30:27 ART

This archive was generated by hypermail 2.2.0 : Fri Jul 01 2011 - 06:24:28 ART