Re: OT:6500 Combined power question

Hopefully someone has a test environment with enough cards to try it and let
us know.

On Mon, Jun 20, 2011 at 10:10 AM, John Neiberger <jneiberger_at_gmail.com>wrote:

> A co-worker and I were discussing this very thing this morning.
> Neither of us are sure what happens, though. I think the switch will
> reload and bring up line cards in order until it runs out of power. My
> co-worker thinks that it would probably just start shutting down line
> cards until it had enough power, but it wouldn't reboot. I really have
> no idea which actually happens, though. Hopefully someone here will
> know. I've booted up switches that didn't have enough power, but I
> don't recall pulling a power supply in a live, underpowered chassis
> before.
>
> John
>
> On Mon, Jun 20, 2011 at 11:04 AM, Dennis Worth <dennis.worth_at_gmail.com>
> wrote:
> > Group,
> >
> > Currently an environment is running 110 power combine 3000W PS'. only 111
> > watts available, and need to add another linecard. Need to change out to
> 220
> > to support full 3000 watts.
> >
> > The question is: If i pull power to 1 power supply and plug into new
> > receptacle, what gets shutdown? The whole switch, blades other than sup
> or
> > what? I could not find a document to point me in direction, and i don't
> have
> > a test environment with this setup ;)
> >
> > Thanks,
> >
> > --
> > Dennis Worth
> >
> > "Of all men's miseries the bitterest it this: to know so much and to have
> > control over nothing."
> > --Herodotus
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> >
> >
> >
> >
> >
> >
>

-- 
Dennis Worth
"Of all men's miseries the bitterest it this: to know so much and to have
control over nothing."
--Herodotus
Blogs and organic groups at http://www.ccie.net