Re: OT:QOS understanding

Do you have "mls qos" or any other qos configuration on the 3750x switch?
On your core switch, do you trust markings?

On Thu, Jun 16, 2011 at 4:34 PM, Dennis Worth <dennis.worth_at_gmail.com>wrote:

> Hi Group,
>
> I was working on an access-layer routed approach config, and trying to
> understand the marking of QOS TOS from the switchport level.
>
> I have an IP phone on a 3750X switch that then gets routed to a a core
> switch. What I am not seeing is a marking of the voice traffic from say
> vlan
> 20. I created an ACL on the routed interface at core switch to match IP
> PREC, DSCP values, but nothing seems to match. According to my config on
> the
> Voip phone it should be TOS = A0 or IP PPREC 5 or what I thought was EF.
>
> I am guessing that the TOS byte is just not being automatically mapped to
> DSCP, but not real sure.
>
> Thanks for any help guiding me through this.
>
> --
> Dennis Worth
>
> "Of all men's miseries the bitterest it this: to know so much and to have
> control over nothing."
> --Herodotus
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
Regards,
Joe Astorino
CCIE #24347
Blog: http://astorinonetworks.com
"He not busy being born is busy dying" - Dylan
Blogs and organic groups at http://www.ccie.net