RE: OSPF Weird Issue

You have frame relay map problems or you are running dynamips on windows

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of Routing Freak
Sent: Monday, June 13, 2011 3:12 AM
To: muhammad adnan
Cc: Manouchehr Omari; Cisco certification
Subject: Re: OSPF Weird Issue

HI muhammad,
I used ospf over FR physial interface.
So by default everything is nonbroadcast network type
So i used neighbor command for unicast hello packets, so it forms
neighborship but when i removed the neighbor command ,still the neighborship
is up and i see some messages that neighbor is flapping and i get this error
OSPF Nonneighbor,Sending hellp packets to unknown neighbor

On Mon, Jun 13, 2011 at 12:21 PM, muhammad adnan <taurusadnan19_at_gmail.com>wrote:

> Dear did you configure correct ospf network type? ip ospf network
> point-to-multi nonbroa
>
>
> please post your configration.....
>
> Thanks a lot
> Muhammad Adnan
>
>
> On Mon, Jun 13, 2011 at 11:07 AM, Routing Freak <routingfreak_at_gmail.com>wrote:
>
>> Dude ,The nieghbor is in nonbradcast mode and i have given neighbor
>> statements to all the neighbors
>> thats all the command i have configured
>>
>>
>> On Mon, Jun 13, 2011 at 11:35 AM, Manouchehr Omari <
>> manouchehr1979_at_gmail.com
>> > wrote:
>>
>> >
>> >
>> > Can you just paste the config of those 3 routers.
>> >
>> > Thanks,
>> > Manny
>> >
>> >
>> > On Mon, Jun 13, 2011 at 1:58 AM, Routing Freak <routingfreak_at_gmail.com
>> >wrote:
>> >
>> >> Hi all
>> >> I got this log message when i m doing OSPF labs
>> >>
>> >> Consider a fully-meshed frame-relay network with three routers. The
>> three
>> >> routers are connected to the the frame relay cloud with the IP
>> addresses
>> >> 10.10.10.1, 10.10.10.2 and 10.10.10.3 respectively. However, the
>> neighbor
>> >> relationship on all the routers constantly keeps getting reset with
>> >> messages
>> >> like the following -
>> >>
>> >>
>> >> *Mar 4 16:10:01.333: %OSPF-5-ADJCHG: Process 100, Nbr 10.10.10.3 on
>> >> Serial2 from LOADING to FULL, Loading Done
>> >> *Mar 4 16:10:05.261: %OSPF-5-ADJCHG: Process 100, Nbr 10.10.10.3 on
>> >> Serial2 from FULL to DOWN, Neighbor Down: Adjacency forced to reset
>> >> *Mar 4 16:10:05.521: %OSPF-4-NONEIGHBOR: Received database
>> >> description from unknown neighbor 10.10.10.3
>> >> *Mar 4 16:10:08.813: %OSPF-5-ADJCHG: Process 100, Nbr 10.10.10.2 on
>> >> Serial2 from EXSTART to DOWN, Neighbor Down: Adjacency forced to reset
>> >> *Mar 4 16:10:11.485: %OSPF-4-NONEIGHBOR: Received database
>> >> description from unknown neighbor 10.10.10.2
>> >> *Mar 4 16:10:12.593: %OSPF-5-ADJCHG: Process 100, Nbr 10.10.10.3 on
>> >> Serial2 from LOADING to FULL, Loading Done
>> >> *Mar 4 16:10:14.905: %OSPF-5-ADJCHG: Process 100, Nbr 10.10.10.3 on
>> >> Serial2 from FULL to DOWN, Neighbor Down: Adjacency forced to reset
>> >> *Mar 4 16:10:19.013: %OSPF-5-ADJCHG: Process 100, Nbr 10.10.10.2 on
>> >> Serial2 from EXCHANGE to DOWN, Neighbor Down: Adjacency forced to
>> >> reset
>> >>
>> >>
>> >> Given just this information, can you determine what the problem might
>> be
>> >> here?
>> >>
>> >> What is meant by OSPF NonNeighbor and unknown neighbor?
>> >>
>> >>
>> >> Blogs and organic groups at http://www.ccie.net
>> >>
>> >> _______________________________________________________________________
>> >> Subscription information may be found at:
>> >> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Mon Jun 13 2011 - 07:13:48 ART