Re: OSPF Weird Issue

Dear did you configure correct ospf network type? ip ospf network
point-to-multi nonbroa

please post your configration.....

Thanks a lot
Muhammad Adnan

On Mon, Jun 13, 2011 at 11:07 AM, Routing Freak <routingfreak_at_gmail.com>wrote:

> Dude ,The nieghbor is in nonbradcast mode and i have given neighbor
> statements to all the neighbors
> thats all the command i have configured
>
>
> On Mon, Jun 13, 2011 at 11:35 AM, Manouchehr Omari <
> manouchehr1979_at_gmail.com
> > wrote:
>
> >
> >
> > Can you just paste the config of those 3 routers.
> >
> > Thanks,
> > Manny
> >
> >
> > On Mon, Jun 13, 2011 at 1:58 AM, Routing Freak <routingfreak_at_gmail.com
> >wrote:
> >
> >> Hi all
> >> I got this log message when i m doing OSPF labs
> >>
> >> Consider a fully-meshed frame-relay network with three routers. The
> three
> >> routers are connected to the the frame relay cloud with the IP addresses
> >> 10.10.10.1, 10.10.10.2 and 10.10.10.3 respectively. However, the
> neighbor
> >> relationship on all the routers constantly keeps getting reset with
> >> messages
> >> like the following -
> >>
> >>
> >> *Mar 4 16:10:01.333: %OSPF-5-ADJCHG: Process 100, Nbr 10.10.10.3 on
> >> Serial2 from LOADING to FULL, Loading Done
> >> *Mar 4 16:10:05.261: %OSPF-5-ADJCHG: Process 100, Nbr 10.10.10.3 on
> >> Serial2 from FULL to DOWN, Neighbor Down: Adjacency forced to reset
> >> *Mar 4 16:10:05.521: %OSPF-4-NONEIGHBOR: Received database
> >> description from unknown neighbor 10.10.10.3
> >> *Mar 4 16:10:08.813: %OSPF-5-ADJCHG: Process 100, Nbr 10.10.10.2 on
> >> Serial2 from EXSTART to DOWN, Neighbor Down: Adjacency forced to reset
> >> *Mar 4 16:10:11.485: %OSPF-4-NONEIGHBOR: Received database
> >> description from unknown neighbor 10.10.10.2
> >> *Mar 4 16:10:12.593: %OSPF-5-ADJCHG: Process 100, Nbr 10.10.10.3 on
> >> Serial2 from LOADING to FULL, Loading Done
> >> *Mar 4 16:10:14.905: %OSPF-5-ADJCHG: Process 100, Nbr 10.10.10.3 on
> >> Serial2 from FULL to DOWN, Neighbor Down: Adjacency forced to reset
> >> *Mar 4 16:10:19.013: %OSPF-5-ADJCHG: Process 100, Nbr 10.10.10.2 on
> >> Serial2 from EXCHANGE to DOWN, Neighbor Down: Adjacency forced to
> >> reset
> >>
> >>
> >> Given just this information, can you determine what the problem might be
> >> here?
> >>
> >> What is meant by OSPF NonNeighbor and unknown neighbor?
> >>
> >>
> >> Blogs and organic groups at http://www.ccie.net
> >>
> >> _______________________________________________________________________
> >> Subscription information may be found at:
> >> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Mon Jun 13 2011 - 11:51:10 ART