Re: working vs non-working config / frame-relay

Hi,
Are you asking about the difference between interface types for C1? Or did you missed this point?
Hth,
Robclav

http://robclavbcn.blogspot.com (spanish)
Enviado desde mi BlackBerry. de Vodafone

-----Original Message-----
From: Tapas Das <tapas_75_at_hotmail.com>
Sender: nobody_at_groupstudy.com
Date: Wed, 8 Jun 2011 13:33:41
To: ccielab_at_groupstudy.com<ccielab_at_groupstudy.com>; Hassan Naseh<hassan.naseh_at_gmail.com>
Reply-To: Tapas Das <tapas_75_at_hotmail.com>
Subject: working vs non-working config / frame-relay

                            ===================================
CE-1 ===================================

interface Serial2/0 no ip address encapsulation frame-relay serial
restart-delay 0 clock rate 64000 frame-relay intf-type nni!interface
Serial2/0.101 point-to-point ip address 192.168.10.2 255.255.255.0 frame-relay
interface-dlci 101 !

                            ===================================
CE-2 ===================================interface
Serial2/0 no ip address encapsulation frame-relay serial restart-delay 0
frame-relay intf-type nniend
CE1#sh running-config interface s2/0.101Building configuration...
Current configuration : 120 bytes!interface Serial2/0.101 point-to-point ip
address 192.168.10.1 255.255.255.0 frame-relay interface-dlci 101 end
=============================================================================
=========== Above is the
Working Config
                                                   Below is the config not
working - -- why ?
=============================================================================
===========

                            ===================================
CE-1 ===================================
interface Serial2/0 ip address 192.168.10.2 255.255.255.0 encapsulation
frame-relay serial restart-delay 0 clock rate 64000 frame-relay map ip
192.168.10.2 101 frame-relay interface-dlci 101 frame-relay intf-type dceend

                            ===================================
CE-2 ===================================
interface Serial2/0 ip address 192.168.10.1 255.255.255.0 encapsulation
frame-relay serial restart-delay 0 frame-relay map ip 192.168.10.1 101
frame-relay map ip 192.168.10.2 101 frame-relay interface-dlci 101 frame-relay
intf-type nniend

Blogs and organic groups at http://www.ccie.net
Received on Wed Jun 08 2011 - 12:16:37 ART