Thanks for your reply.
Let me lab put a lab again since my time in the other rented lab is expired.
Best Regards.
______________________
Adil
On May 28, 2011, at 3:45 PM, dcp_at_dcptech.com wrote:
> Looks like you are dropping icmp but not classifying anything else. You
> haven't defined any bandwidth for the default class so it isn't getting
> any.
>
> David
>
>> Guys,
>>
>> Could you please tell me why am I getting this error message in Yusuf's
>> lab 1 - Q 6.1?
>> I have done this lab multiple times but never saw this error message.
>>
>> Whey I apply the policy map on control-plane the DMVPN or eigrp drops
>> between dmvpn nei. Is there a bug issue or am I doing something wrong
>> today?
>>
>> Thanks.
>>
>> -----------
>>
>>
>> !
>> class-map match-any cm_icmp
>> match access-group 112
>> match not access-group 111
>> !
>> !
>> policy-map pm_icmp
>> class cm_icmp
>> drop
>> !
>> access-list 111 permit icmp 10.0.0.0 0.255.255.255 any
>> access-list 111 permit icmp 172.16.0.0 0.15.255.255 any
>> access-list 111 permit icmp 192.168.0.0 0.0.255.255 any
>> access-list 112 permit icmp any any
>> !
>> control-plane
>> service-policy input pm_icmp
>> !
>>
>> R2(config-cp)#service-policy input pm_icmp
>> R2(config-cp)#end
>> R2#
>> *May 28 13:41:14.638: %CP-5-FEATURE: Control-plane Policing feature
>> enabled on Control plane aggregate path
>>
>> *May 28 13:41:15.434: %SYS-5-CONFIG_I: Configured from console by console
>> R2#
>> *May 28 13:41:27.106: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 100: Neighbor
>> 172.1.0.1 (Tunnel1) is down: holding time expired
>> R2#
>>
>>
>> Best Regards.
>> ______________________
>> Adil
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
Received on Sat May 28 2011 - 18:41:31 ART
This archive was generated by hypermail 2.2.0 : Wed Jun 01 2011 - 09:01:12 ART